› ›

KDan

About

Username
KDan
Joined
Visits
24
Last Active
Roles
Member

Comments

  • It doesn't work. I can select another group in the touchscreen interface, but the content is always only what is in the default group. It appears that group selection is not working at all in the touchscreen interface. If I select any user define…
    in 0.80.1 Touchscreen interface only sees default G-code directory Comment by KDan November 2016
  • I checked user profiles and there are no users in the user database. Still no response to Printer Cmds from the touchscreen. Remote function via web browser is fine.
    in Printer Commands Comment by KDan November 2016
  • I think I'll just wait for the new pi image if it will be available soon. I'm very rusty on Linux and the image file makes it much easier.
    in Printer Commands Comment by KDan November 2016
  • Repetier said: Remove your users and it should work. Already found the cause of the problem and fixed it locally. Just waiting for some more responses to see if we have some more minor issues to fix. Can you describe how to do this? I tried …
    in Printer Commands Comment by KDan November 2016
  • To followup on this, it will connect. Unfortunately, I found that only a limited number of functions will work. I can home axes and jog them around. I can also turn on the heatbed, but I have no hotend control (wrong g-code is being sent? - no way t…
    in RADDS Serial Header Comment by KDan September 2016
  • Thanks for the reply. Switching motor connections doesn't help, it just moves the problem to the X axis. The currently selected drive system is "1";  “z axis + H-gantry/core-XY (x_motor = x+y, y_motor = x-y)” which is the one that supposedly is corr…
    in Setting origin and proper homing direction on CoreXY Comment by KDan September 2016
  • I had it working this week. Needed to fix some code so only dev version can handle it at all. It pointed out that there was no paneldue support at all - it was for the dues server which seems to use different formats. Could you clarify? How do I id…
    in RADDS Serial Header Comment by KDan August 2016
  • Eddie, Did you ever try the RepRap firmware on the RADDS? Since the Reprap firmware was intended to support the PanelDue on the Duet, you'd think it would work with RADDS also. Afterall, a serial port is just a serial port... Same processor pins, e…
    in RADDS Serial Header Comment by KDan August 2016
  • I'm having the same problem. I'm positive I have the correct pins connected,  Din (top pin on PanelDue) is connected to the AUX1 Tx pin on the RADDS. Dout connected to Rx pin.JSON is enabled, using the Dev version of Repetier Firmware. Serial 1 sele…
    in RADDS Serial Header Comment by KDan August 2016