wcheney64
About
- Username
- wcheney64
- Joined
- Visits
- 0
- Last Active
- Roles
- Member
Comments
-
Thanks. That appears to work. Don't even have to change the temperature. Just selecting the desired temperature works. Thanks again.
-
Fantastic. Thank you.
-
Looks like firmware 1.0.3 Here's what I believe is the relevant part Recv:10:11:17.156: Set output: 13 to 255Recv:10:11:17.156: ok 17Recv:10:11:17.156: ok 18Send:10:11:17.156: N26 G1 X23.688 Y72.162 F6000Recv:10:11:17.190: pos absolute falseRecv:10…
-
Not sure what firmware version. Hav reached out to Stacker to answer that. At the Repetier end it does not seem to offer any functionality to change filament. Just shows the stop/ pause buttons and I did try hitting pause with the idea that I could…
-
I just tried a print with the raspberry pi/ repetier server disconnected and printing directly from the Stacker off the SD card. No problem resuming, temperature stayed at 220C so it seems that it is definitely linked to the Repetier Server.
-
By control button I mean the main control on the Stacker itself. Press once to heat up to change filament. Change filament. Rotate know to feed filament. Press knob to restart the print. Temperature is at temp after changing the filament and purging…