Kru5sty3dp
About
- Username
- Kru5sty3dp
- Joined
- Visits
- 5
- Last Active
- Roles
- Member
Comments
-
Yeah I thought it wouldn't be easy and I hadn't thought of multiple objects printing. I was actually thinking the update should be done on the fly without parking/pausing during a layer change. An implementation could perform some checks before even…
-
Sure thing. here is the output: Recv:13:19:35.314: T:138.16 /160.00 B:42.44 /50.00 @:127 B@:127 Recv:13:19:36.317: T:139.10 /160.00 B:42.35 /50.00 @:127 B@:127 Recv:13:19:37.326: T:140.16 /160.00 B:42.28 /50.00 @:127 B@:127 Recv:13:19:38.326: T:141…
-
After spending most of the day testing I have now figured out why this was happening My printer has a 2-in-1-out mixing hotendend and therefore I'm using virtual tools which I hadn't configured in the printer config as it's never been a problem. …
-
Started testing using the console and it does show something interesting. When a print job starts the console shows 1 error 'Cannot read properties of undefined (reading 'retractSpeed') in angular-min.js. As soon as the print finishes I get 9 mo…
-
I'm using Edge. I don't have any post-processing scripts nor do I use time lapse. Haven't got a camera connected. I do have history reports enabled and these generate ok. I've got a couple of custom gcode buttons defined but that's as far as my cust…
-
I've had the exact same issue after upgrading from 1.3.0 to 1.4.1 and have just managed to fix it. It was caused by the runout sensors being enabled when they were expected to be disabled. I don't use them, therefore I had them disabled from the L…
-
Hallo noch einmal. Wollte nur kurz bescheid geben, das Direktdruck von PrusaSlicer nun funktioniert - die neuste beta version (2.4.0. beta 2) hat nun einen zusätzlichen Knopf "Upload and Print". Funktioniert super
-
Ach schade. Aber vielen Dank für die schelle Antwort. Bisher haben sie es noch nicht implementiert, aber ich habe dort mal Kommentiert um Interesse zu zeigen. Mal sehen ob's was bringt. Danke sehr.