Fabrizio
About
- Username
- Fabrizio
- Joined
- Visits
- 28
- Last Active
- Roles
- Member
Comments
-
anyone else with this problem?It has happened to me in 2 different instances (different RPi and printers)
-
the gcode that runs is @if {{job.running}}@info Sin Filamento MagnaSE5@pushmessage Sin Filamento MagnaSE5@pauseExtruderCooldown@outOfFilament@endif
-
Repetier said: Not planned, but there are plans to have later a master server showing all printers. But first other things need to be written. Hello Repetier, I wanted to know if you have news about this future implementation. I will add n…
-
I think it would be great to have this in RS! Hopefully they can implement it soon
-
That would be great!! Do you have an approximate time when we could expect this functionality?
-
It worked! thank you so much
-
I just saw that in the printer configuration, in the "Connection" tab, I have a port that says /var/lib/klipper/sockets/Klipper1There you should choose that port and in the Klipper printer.cfg you should put the port /dev/serial/by-path.....Is this …
-
Repetier said: Just to be sure - you set in server the port to klipper socket and not the usb port, right. Because sever connects to klipper and slipper has as serial the port of the board. If that is correct you should see green connection …
-
Repetier said: Yes, if that is where it aborts that is the issue. With unstable connection to pi the interface can freeze and the longer it take the more likely it can get. Longest is installing all the packacges missing. So what you can try …
-
I have installed ubuntu server and Klipper on a PC without problems a few days ago, so I don't think it's a problem with my internet, the problem appears when I want to install it through Repetier Server
-
Try sending the job from Projects, From the printer with the "DirectPrint" button and from the Gcode that I have saved in the printer in "Groups"In neither case did the script work. With the Offset I was able to solve the problem, but I would have l…
-
Repetier said: For me it was working in my tests. You can add a extra line like M118 Changed to see if it tried to replace at all. With sich changes it is alwazs the question if expression is not recogniced or if the replacement is not worki…
-
Repetier said: Line 4 is missing a at sign before 0. Forum likes to eat some chars so that is missing for anything below 50. Since condition is anything above 50 gets 10 added yes 200 becomes 210. Worked for me. If you do want a uppe rlimit …
-
I also have some gcode with a temperature of 200°CThis code would increase them 10°C, so would it leave them at 210°C? Is that so or am I misinterpreting it?
-
It doesn't work for me, copy the commands I see in the console. Send:15:32:06.367: N150593 M75 CFFFP_3DBenchySend:15:32:06.367: N150594 M73 P0 R157 Q0 S157Send:15:32:06.406: N150595 M140 S55Send:15:32:06.416: Slow command added:M190 S55Send:15:32:0…
-
Repetier said: Did you define two tools in Repetier-Server? Only then you see two extruders. Yes, I defined the 2 extruders. Sometimes it shows temperature, but most of the time it shows zero
-
This is interesting, I would like to implement it on my servers (RPI all of them)Could you explain a little more how to do it?
-
cool! I knew I could use an "if" but I didn't know how to do it, it worked fine, thanks
-
I formatted the SD and reinstalled RS again and I haven't had any server reboots yet, but one of the printers is having random really big pauses, which generates a giant blob I look in the "Console" tab and find this message Mesg:2:06:44.576: Connec…
-
I tried once again something to have all the printers in a single instance of RS but it didn't work properlyUse the Raspberry only as a bridge to connect the usb (I know that the Raspberry up to 4 machines for each RPi do not have EMI problems)in th…
-
Repetier said: We are still working full time on V1 so no release time or idea when this will be or we even start on it. This is a more theoretical version containing all breaking changes we think would make sense after our experience. try…
-
Repetier said: Regarding EMI linux issue, you see they are reported from the usb hub. So if it works on pi and not laptop it might be that hubs have different tresholds when they report/interrupt connection. You might try adding a usb hub in …
-
Fabrizio said: /: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M/: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M/: Bus 05.Port 1: Dev 1, Class=…
-
Repetier, is there a way for a printer that is installed on a server to use the gcode directory of another printer installed on another instance of RS?I know that I could generate Projects but I don't feel comfortable with them, I prefer to have eve…
-
Update:Change the cable and also exchange the port with another printer the sameThe same physical printer was cut again, that is, with another cable and another port (and another configuration) but the same printer and it was cut againI clarify that…
-
Repetier said: Yes, it is linux disconnecting serial so nothing we can control. All you can do is enable to reconnect automatically and continue print in server. If that does not reset printer it at least allows to continue printing with shor…
-
So I have to look for the problem outside the server, right? External EMI from power supplies or something? I will try to find new cables and I will try to keep the usb cables away from the power cables
-
/: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M/: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=ehci-…
-
It is not connected to a HUB, it is a desktop PC, Dell Optiplex 750.I am connecting the 6 rear ports and one front
-
Repetier said: First, you should check /var/log/syslog (still linux I hope) to see why linux disconnected. I see it must be something temporarily as it reconnects quickly so probably EMF issues. After all you have 7 sources with own power tha…