antwal

Comments

• For the moment I have connected all the printers to the usb 2.0 hub I remove all the webcams on this installation and restored version 1.3.0 which works without problems Then later on another installation I will do other tests to see what happens us…

  in v.1.2.1 and 1.3.0 Printers stop working after 4 hours if Timelapse is enabled Comment by antwal March 2022
• Go back version 1.2.0, working without problems, also with errors on syslog

  in v.1.2.1 and 1.3.0 Printers stop working after 4 hours if Timelapse is enabled Comment by antwal February 2022
• raspberry is powered by the original power supply, but I also tried with XL4005 5A DC Step-Down Converter; but with both I do not reveal problems of feeding; even the server reveals no problems : https://gyazo.com/25974321062bd32248c9ae3359f2170c …

  in v.1.2.1 and 1.3.0 Printers stop working after 4 hours if Timelapse is enabled Comment by antwal February 2022
• lsusb -t  /:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M        |__ Port 1: Dev 4, If 0, Class=Vendor …

  in v.1.2.1 and 1.3.0 Printers stop working after 4 hours if Timelapse is enabled Comment by antwal February 2022
• antwal said: In the new installation the server does not start and I don't understand why - https://pastebin.com/mHET1EWt resolved, wrong permissions when i copied the backup webcams are ready - https://pastebin.com/6a3EKT13 always e…

  in v.1.2.1 and 1.3.0 Printers stop working after 4 hours if Timelapse is enabled Comment by antwal February 2022
• Old Image (not working) kernel is: 5.15.24-v7l+ New Image (need test) kernel is: 5.10.92-v8+

  in v.1.2.1 and 1.3.0 Printers stop working after 4 hours if Timelapse is enabled Comment by antwal February 2022
• In the new installation the server does not start and I don't understand why - https://pastebin.com/mHET1EWt

  in v.1.2.1 and 1.3.0 Printers stop working after 4 hours if Timelapse is enabled Comment by antwal February 2022
• I have all the printers connected to multiple 2400W UPS; there should be no power problems always in theory Currently I had connected a D-Link USB HUB (DUB-H7) to all the printers on the USB 3.x port of the RPi; instead the webcams were connected to…

  in v.1.2.1 and 1.3.0 Printers stop working after 4 hours if Timelapse is enabled Comment by antwal February 2022
• hi,  currently i only connected two printers and two webcams, without the usb hub as i would have to reconnect all 8 printers and 8 webcams if i can get it to work I am attaching the complete syslog - https://pastebin.com/eBWAMKAS

  in v.1.2.1 and 1.3.0 Printers stop working after 4 hours if Timelapse is enabled Comment by antwal February 2022
• I am doing further checks; for the moment I changed the usb cables by cutting the power supply; I disabled the webcams for safety and started a 6 hour print. I'll update you as soon as I verify the problem better; however with version 1.2.0 this pro…

  in v.1.2.1 and 1.3.0 Printers stop working after 4 hours if Timelapse is enabled Comment by antwal February 2022
• Repetier said: Not really sure what you want. You want some parts of the regular GUI inside monitor or the other way around? Printer management in server is not possible to transfer. It requires a node server as well - monitor is not just a …

  in GUI Server Upgrade Comment by antwal October 2021