racermark
About
- Username
- racermark
- Joined
- Visits
- 5
- Last Active
- Roles
- Member
Comments
-
well things have gone very well with your help THANKS I am now looking to build another Printer. I would also like to make it bigger and better. Thinking about going to a 32bit board. The BIGTREETECH SKR 2 seems like a really complete board as well…
-
ok I am having a problem understanding where the LONG LIST of pins available in the list of pins actually come out of the Ramps board. Does the pin for heater require a didital output? Requiring it to be from the digital pin area on the Ar…
-
WEL i found a problem and it is what you were talking about. I killed the mosfet. I have ordered a couple of the external bed heaters but they want to hook up to the standaard output for bed hear. I think the output to control the circuit coms from …
-
OK I do not know what happened but the bed will not heat up. It has power from the Ramps the bed has continuity through the wires maybe it is shorted IDK the Heat Bed I had was a 300 300 so will not work. Oh well I will replace the Ramps and maybe t…
-
Well it took till about 11PM here in central time USA but with your help and some hard thinking to figure out what you ment about the pins are not what you think pins. there are many variations on the ramps board and some call out the pins different…
-
Well Not sure what you mean ffirmware is not reading the analog input used for thermistor. I have the extruder plugted into sensor 0 the closest to the end with the power and usb plug. the bed is pluged into the sensor 1 the moddle one and cur…
-
Well I guess I will say the blue is what windows shows on almost everything on the internet, it started being used about the time windows 10 cam out. for normal sighted people it is easier on the eye. I understand that. The not normal sighted ones o…
-
ok I got the `upload to work and started seting up the printer travel and other things that I have setup before and all was well until I started adjusting the steps per MM. I make a change upload it with no problems but there is still the origonal 7…
-
OK I will try that I did get the 1.05 to load after your changes THANKS Making headway and hope to be up and running today I will report probress Mark
-
OK that makes since why when i used 1.05 it worked but still had some kind of problem. I will try both tomorrow. I got it somewhat working with the even older one. it just does not have some of the things the newer ones have. as for the Feature l…
-
OK I have beeen on a CRASH COURSE of learning where everything is. I think I have an idea how to sort out my problems with the LCD. I have a working 1.04 I think but it does not haave the correct LCD controller. I seem to undderstand that I ca…
-
Thanks I uploaded my file to config tool 1.04 I downloaded the full file opened Repetier.ino and checked verify compile failed opened the Eeprom.cpp and it had the comment still there so i deleted it as you described and saved it and opened …
-
well i started over with an old file and it was fine then i noticed it had reverted to the previous version of configurator and the display did not work at all. but it did compile and load. so i added 1 at a time to the old file in the old co…
-
I guess I need a more detailed help SORRY I have tried several different removals from the begining of the /* */ * / individually one at a time from the beginning of the Eeprom.cpp file. the errors change but will not compile I am suppres…
-
Repetier said: Please delete the comment at the file start in Eeprom.cpp - it contains a character that your compiler does not like. OK so I am not really up on codeing but I am trying hard. So in Notepad++ I open the Eeprom.CPP and rem…
-
I downloaded the file directly from the last part of the config tool it comes as a .zip I extract it with WinRar and open it with IDE. when i verify compile it fails. it is always the same with EVERY file I download. I know it is something I a…
-
here is my file that will not verify compile I have run out of Jack Daniels PLEASE HELP error received Eeprom.cpp:1:1: error: stray '\357' in program /* ^Eeprom.cpp:1:2: error: stray '\273' in program /* ^Eeprom.cpp:1:3: error: stray '\277' in…