linc
About
- Username
- linc
- Joined
- Visits
- 4
- Last Active
- Roles
- Member
Comments
-
Thanks for your reply. As you said above, you were right! I just splitter the M104 T0 S100 T1 S100 to two codes by "M104 T0 S100", "M104 T1 S100", and this works just fine. I have no idea why I thought I could set the temperature of two extruders a…
-
I confirmed the console and watched what happens with the M105 filter off. And this is what I got when I pressed the pause button. Send:8:38:46.242: N56 G1 X173.690 Y134.645 E1.2324Recv:8:38:47.230: T:0.00 /250.00 B:0.00 /0.00 C:0.00 /0.00 T0:0.00 …
-
Sorry for the above codes written in one line. Here is the code with the line changing. Send:3:02:54.594: @pause User requested pause.Send:3:02:54.595: N128 M104 T0 S100 T1 S100Recv:3:02:54.601: okSend:3:02:54.602: N129 M76Recv:3:02:54.605: okSend:…
-
Thank you for your reply. First, I tried with the Nightly build as you said, but I'm having the same problem. This is what I receive after printing my part on 1. Send:3:02:54.594: @pause User requested pause.Send:3:02:54.595: N128 M104 T0 S100 T1 S…
-
I checked the other version again, but all other versions don't work. I can't find other FAQs mentioning this problem. My Gcode file sets the nozzle temperature to 250Cº on starting code, and when I pause the print, the nozzle temperature got settle…
-
Thanks for the reply. I solved the problem by updating the version.