schumsel293

Comments

• Hi,thank you for the quick response.Im am looking how to realize this in the settings of the configuration tool, before i deinstall the Z min endstop, put iton the Z max position of the printer and make it a Z max endstop. New wiring is included. Ha…

  in Bed leveling - can't get nozzle close enough to bed surface Comment by schumsel293 March 2015
• I set different values for Z_PROBE_HEIGHT via configuration tool changing the eprom mode every time; I also put in different values via Repetier Host (writing to the eprom). I could not see any effect. Only in the display you can see the value of Z_…

  in Bed leveling - can't get nozzle close enough to bed surface Comment by schumsel293 March 2015
• Thank you for the quick response. The problem has been fixed.The motor- and endstop cables had not been drilled.After drilling the cables the z-homing procedure works as wanted. The endstop must have been triggered early by crosstalk.At first I did …

  in Z-homing no endstop hit Comment by schumsel293 March 2015