i am running repetier-server on my raspberry pi b+,i can access the web interface through my local network but my bellman K8200 can't get connected in the server....
I had another one with the same problem. He said jumpering the bridge to update firmware helps. I guess the jumper allows resetting firmware which is what server does on connect.
I don't have a vellemann so I don't know which 2 pins he meant. He meant for flashing new firmware you have to close them so I guess it is somewhere in the documentation.
No need to flash new firmware if the old one is working good for you. You should only close the pins with a jumper.
No link, it wa sin a mail exchange. But that is all he said. He uploaded the firmware and forgot to remove jumpers and then realised that connection worked.
In order to flash the firmware on the k8200 arduino board (arduino 2560) you must indeed connect/jumper the 2 pins on the header that says "jprog". This is also described in the manual which can be found here:
Comments