›

Configuration in Repetier Host

EdVEdV
in Repetier-Host
Hi repetier guys
I really love your host program and I am using it constantly. I built from scratch a RostockDelta and for now a UM2 clone so when this one is finished I can overhaule my noisy Delta, after that I'll build a second UM2 with a Diamond head.(extruded aluminium)
But, there is always a BUT, what I would like to have in Repetier Host is a configuration that is connected to the filament. So when I select PLA type xx than the temperature settings will follow this choice, same for when I select ABS temp will follow.
At the moment , as far as I can see the temp is connected to the printertype which is not the the best way IMHO.
I might have overlooked some settings and, I am sorry in advance but please would you take this in considderation.
Basicly I would like to have a configuration based on filament and not based on printertype

Best regards
Ed

Comments

  • RepetierRepetier
    What has filament to do with printer configuration? Ok we have some default temperatures, but for printing you run  gcode and tehrefore you select filament type with correctly set temperatures.
  • EdVEdV
    Thank you for your comment
  • RokoRoko
    @EdV - In my RH I have the option under the slicer tab of Filament Settings - Extruder 1 (I only have one extruder)
    For Slic3r  or CuraEngine - I just set up a configuration of temperature and/or cooling rate and just named it  "PLA_Yellow_195 or ABS_Black_240" or whatever and make sure I select that before I slice the item.
Sign In or Register to comment.