›

SD card recognized but no files

JeromeJerome
edited September 4 in Repetier-Firmware
When I insert sdcard it is seen but I cannot see any files.
Files on sd card or *.gcode

What can be the cause? 

thanks

Comments

  • RepetierRepetier
    First check if it it is vfat formatted and not too big. Also try .g extension. Also only sd cards with SPI support are supported, firmware has no parallel reader support.
  • JeromeJerome
    So fat32 does not work?


    Ill try thanks. 
  • RepetierRepetier
    Fat32 should also work.
  • JeromeJerome
    Hi, found the issue.

    There is an extension cable for the SD card, that was making bad contact.
    Fixed it and now it shows all g-code file.

    Thanks
Sign In or Register to comment.