EXTRUDE Screen messed up after update

nickbeat76 · August 2021

Hi!

The Extrude-screen on my Pi4 with 7" touch-display is messed up since the last update.

Now i only can see the "SET TEMP" and "MOTORS OFF" icons, beside thge buttons for "0.01", "1" and "25"...

Everything else is gone.

Any way to fix that?

Repetier · August 2021

Not for the resolution. You can upgrade to 1.1.3 beta by changing download link, but do then not forget to update again when final version is out.

nickbeat76 · August 2021

Works again!

Dangö!!

vdubguy · August 2021

Same problem but can't seem to find the link to the beta.

Repetier · August 2021

There is no link. Take 1.1.2 link and change version to 1.1.3 for latest beta.

vdubguy · August 2021

Repetier said:

There is no link. Take 1.1.2 link and change version to 1.1.3 for latest beta.

take this: https://download4.repetier.com/files/server/images/Repetier-Server-Image_1_1_2_v26.zip

Change it to this: https://download4.repetier.com/files/server/images/Repetier-Server-Image_1_1_3_v26.zip

This is what i tried but got nothing.

Repetier_Support · August 2021

There are no beta Raspberry Pi Images. If You want to install a beta biuld un your pi, you have to connect to its shell (for example per SSH) and download the beta linux build.

Download on Pi3 and above
wget https://download3.repetier.com/files/server/debian-armhf/Repetier-Server-1.1.3-Linux.deb

Download on Pi2 and below
wget https://download3.repetier.com/files/server/debian-armel/Repetier-Server-1.1.3-Linux.deb

and install it with:
sudo dpkg -i Repetier-Server-1.1.3-Linux.deb

vdubguy · August 2021

I see. I was misunderstanding. Thank you. all fixed.

EXTRUDE Screen messed up after update

Comments