EXTRUDE Screen messed up after update

nickbeat76

Hi!

The Extrude-screen on my Pi4 with 7" touch-display is messed up since the last update. 
Now i only can see the "SET TEMP" and "MOTORS OFF" icons, beside thge buttons for "0.01", "1" and "25"...  
Everything else is gone.

Any way to fix that?

Repetier

Not for the resolution. You can upgrade to 1.1.3 beta by changing download link, but do then not forget to update again when final version is out.

nickbeat76

Works again!

Dangö!!

vdubguy

Same problem but can't seem to find the link to the beta.

Repetier

There is no link. Take 1.1.2 link and change version to 1.1.3 for latest beta.

vdubguy

Repetier said:

There is no link. Take 1.1.2 link and change version to 1.1.3 for latest beta.

take this:   https://download4.repetier.com/files/server/images/Repetier-Server-Image_1_1_2_v26.zip

Change it to this:   https://download4.repetier.com/files/server/images/Repetier-Server-Image_1_1_3_v26.zip

This is what i tried but got nothing.

Repetier_Support

There are no beta Raspberry Pi Images. If You want to install a beta biuld un your pi, you have to connect to its shell (for example per SSH) and download the beta linux build.

Download on Pi3 and above 
wget https://download3.repetier.com/files/server/debian-armhf/Repetier-Server-1.1.3-Linux.deb

Download on Pi2 and below
wget https://download3.repetier.com/files/server/debian-armel/Repetier-Server-1.1.3-Linux.deb

and install it with:
sudo dpkg -i Repetier-Server-1.1.3-Linux.deb

vdubguy

I see. I was misunderstanding. Thank you. all fixed.