› ›

Installation 1.1 kill my raspberry server

orlinsorlins
in Bug Reports
Hello,

I have my license since 2019 and I have never had an update problem
Switched from 1.03 to 1.1 and my server no longer responds: 504 Gateway Time-out
how to restart the service? SSH works fine.


Florian

Comments

  • orlinsorlins
    I will reinstall everything, I'm angry
    Next time i will wait
  • Repetier_SupportRepetier_Support
    We already noticed and fixed this issue in version 1.1.2, which is also available now.
    You don't have to reinstall everything, a reboot of the system would be enough. After that you can install the fixed update.
  • orlinsorlins
    I just took my 0.91.2 backup and updated via SSH.
    Always 504 Gateway Time-out
    nginx / 1.10.3

    SSH is working, the WEB interface is no longer working, the port is good.
  • Repetier_SupportRepetier_Support
    As I said, please reboot your machine.
  • RepetierRepetier
    If it still does work, please post the ssh content where you tried the update, so we can see the error message/the problem.
  • orlinsorlins
    edited August 2021
    As I said, please reboot your machine.
    3 times :smile:

    I post the SSH content, ok




  • orlinsorlins


    login as: pi
    pi@192.168.1.212's password:
    Linux Repetier-Server 4.15.18-v7 #1 SMP Mon May 7 16:35:40 CST 2018 armv7l

    The programs included with the Debian GNU/Linux system are free software;
    the exact distribution terms for each program are described in the
    individual files in /usr/share/doc/*/copyright.

    Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
    permitted by applicable law.
    Last login: Fri May 17 09:20:03 2019
    pi@Repetier-Server:~ $ sudo /usr/local/Repetier-Server/bin/RepetierInstaller /usr/local/Repetier-Server/etc/RepetierServer.xml                                                                                                               RepetierInstaller V1.1
    (C) 2015-2018 Hot-World GmbH & Co. KG
    Update info read ...
    Update file loaded and verified ...
    [1]+  Done                    xinit -- -nocursor 2> /dev/null > /dev/null
    pi@Repetier-Server:~ $
    pi@Repetier-Server:~ $ (Reading database ... 54205 files and directories currently installed.)
    Preparing to unpack .../Repetier-Server-1.1.2-Linux.deb ...
    Uninstall Repetier-Server
    Failed to open /dev/tty: No such device or address
    Removed /etc/systemd/system/multi-user.target.wants/RepetierServer.service.
    Unpacking repetier-server (1.1.2) over (0.91.2) ...
    Setting up repetier-server (1.1.2) ...
    Install Repetier-Server
    Adding user repetierserver to group video
    Adding user repetierserver to group adm
    Failed to open /dev/tty: No such device or address
    Created symlink /etc/systemd/system/multi-user.target.wants/RepetierServer.service → /lib/systemd/system/RepetierServer.service.
    Failed to open /dev/tty: No such device or address
    /usr/sbin/ModemManager
    --------------------------------------- IMPORTANT ---------------------------------------
    You have ModemManager installed. This software automatically connects to new serial devices
    until it detects them not being a modem. This will interfere with printer connections and
    can cause communication errors during the first 20 seconds. To get rid of this you can
    uninstall the software with:
    sudo apt-get remove modemmanager
    If you need it for communication with mobile broadband modems make it ignore your serial ports:

    Processing triggers for systemd (232-25+deb9u11) ...

  • RepetierRepetier
    edited August 2021
    So update worked. Is now everything fine or still problems?

    You might want to deinstall modemmanager as it interferes with serial devices like printers.

  • orlinsorlins
    I uninstalled modemmanager, reboot; still the same

    pi@Repetier-Server:~ $ sudo apt-get remove modemmanager
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    The following packages were automatically installed and are no longer required:
      libmbim-glib4 libmbim-proxy libqmi-glib5 libqmi-proxy
    Use 'sudo apt autoremove' to remove them.
    The following packages will be REMOVED:
      modemmanager
    0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.
    After this operation, 2,333 kB disk space will be freed.
    Do you want to continue? [Y/n] y
    (Reading database ... 54214 files and directories currently installed.)
    Removing modemmanager (1.6.4-1) ...
    Created symlink /run/systemd/system/ModemManager.service → /dev/null.
    Removed /run/systemd/system/ModemManager.service.
    Processing triggers for man-db (2.7.6.1-2) ...
    Processing triggers for dbus (1.10.26-0+deb9u1) ...
    Processing triggers for hicolor-icon-theme (0.15-1) ...
  • orlinsorlins
     ps aux | grep RepetierServer
    repetie+  2439 99.5  1.0  19560 10312 ?        R<sl 11:36   1:07 /usr/local/Repetier-Server/bin/RepetierServer -c /usr/local/Repetier-Server/etc/RepetierServer.xml --daemon
    pi        2486  0.0  0.0   4368   524 pts/0    S+   11:37   0:00 grep --color=auto RepetierServer

  • orlinsorlins
    I tried to access via a virtual machine under linux, same, no web interface. Reinstalled 0.91.2 ok but 1.1.2 does not work.
    I will download the whole image, I will have to reconfigure my two Prusa Mk3s

  • orlinsorlins
    Installation and configuration complete. It only remains to test. Too bad all the same for this update which took me the whole day.

    Florian
Sign In or Register to comment.