Missed drawings in Print Preview "speed" mode

guffy · February 2018

hi

It looks like RH automatically builds range of speeds from gcode file and it doesn't draw perimeter which speed is on top of the range

Image: https://forum.repetier.com/uploads/editor/nc/d0s4kmo1a2me.jpg

in Extruder mode it draws well

Image: https://forum.repetier.com/uploads/editor/15/36eubch44oev.jpg

Sliced with Slic3r, perimeter speed set to 120

guffy · February 2018

Image: https://forum.repetier.com/uploads/editor/3n/z21tqw97pf4d.jpg

guffy · February 2018

gcode file: https://drive.google.com/open?id=1wnv-mqHz_5xoG2zTfZd3RGLYu-R1idQT

Repetier · March 2018

Ok, can reproduce the issue and will check what is happening here. Looks like it affects the fastest speeds. Just reducing one speed from 7200 to 7199 makes it appear. So it should be a simple thing to fix for next release.

Repetier · March 2018

Ok, found it. Happens if the max. speed is exactly the max. speed in your range scale. So setting max. speed here to 7199 would already fix the problem. Next release will handle it also correct for 7200.

Missed drawings in Print Preview "speed" mode

Comments