Filament change
The filament shift, Z axis goes to 0
Resulting in plastic accumulation fused under nozzle
Where it is possible to change the setting
Only when the system is switched on
Resulting in plastic accumulation fused under nozzle
Where it is possible to change the setting
Only when the system is switched on
Comments
Use only for changing the ABS-PLA-PETG coil
Not during printing
My fast length is 750 mm
Slow 18 mm
N20 G1 X0.00 Y0.00 F2400
> 22:47:31.311: ok 20
< 22:47:31.311: N21 G1 Z0.00 F2400
> 22:47:31.313: ok 21
< 22:47:31.313: N22 G1 E50.00 F2400
> 22:47:31.315: ok 22
< 22:47:31.315: N23 G1 X0.00 Y0.00 F2400
> 22:47:31.317: ok 23
< 22:47:31.317: N24 G1 Z0.00 F2400
> 22:47:31.319: ok 24
< 22:47:31.319: N25 G1 E100.00 F2400
> 22:47:31.321: ok 25
< 22:47:31.321: N26 G1 X0.00 Y0.00 F2400
> 22:47:31.324: ok 26
< 22:47:31.324: N27 G1 Z0.00 F2400
> 22:47:31.326: ok 27
< 22:47:31.326: N28 G1 E150.00 F2400
> 22:47:31.328: ok 28
< 22:47:31.328: N29 G1 X0.00 Y0.00 F2400
> 22:47:31.330: ok 29
< 22:47:31.330: N30 G1 Z0.00 F2400
> 22:47:31.332: ok 30
< 22:47:31.332: N31 G1 E200.00 F2400
> 22:47:31.334: ok 31
< 22:47:31.334: N32 G1 X0.00 Y0.00 F2400
> 22:47:31.337: ok 32
< 22:47:31.337: N33 G1 Z0.00 F2400
> 22:47:31.339: ok 33
< 22:47:31.339: N34 G1 E250.00 F2400
> 22:47:31.341: ok 34
< 22:47:31.341: N35 G1 X0.00 Y0.00 F2400
> 22:47:31.343: ok 35
< 22:47:31.343: N36 G1 Z0.00 F2400
> 22:47:31.345: ok 36
< 22:47:31.345: N37 G1 E300.00 F2400
> 22:47:31.347: ok 37
< 22:47:31.348: N38 G1 X0.00 Y0.00 F2400
> 22:47:31.350: ok 38
< 22:47:31.350: N39 G1 Z0.00 F2400
> 22:47:31.352: ok 39
< 22:47:31.352: N40 G1 E350.00 F2400
> 22:47:31.354: ok 40
< 22:47:31.354: N41 G1 X0.00 Y0.00 F2400
> 22:47:31.356: ok 41
< 22:47:31.357: N42 G1 Z0.00 F2400
> 22:47:31.359: ok 42
< 22:47:31.359: N43 G1 E400.00 F2400
> 22:47:31.361: ok 43
< 22:47:31.361: N44 G1 X0.00 Y0.00 F2400
> 22:47:31.363: ok 44
< 22:47:31.363: N45 G1 Z0.00 F2400
> 22:47:31.365: ok 45
< 22:47:31.365: N46 G1 E450.00 F2400
> 22:47:31.367: ok 46
< 22:47:31.367: N47 G1 X0.00 Y0.00 F2400
> 22:47:31.370: ok 47
< 22:47:31.370: N48 G1 Z0.00 F2400
> 22:47:31.372: ok 48
< 22:47:31.372: N49 G1 E500.00 F2400
> 22:47:31.374: ok 49
< 22:47:31.374: N50 G1 X0.00 Y0.00 F2400
> 22:47:31.376: ok 50
< 22:47:31.376: N51 G1 Z0.00 F2400
> 22:47:31.378: ok 51
< 22:47:31.378: N52 G1 E550.00 F2400
> 22:47:31.380: ok 52
< 22:47:31.380: N53 G1 X0.00 Y0.00 F2400
> 22:47:31.383: ok 53
< 22:47:31.383: N54 G1 Z0.00 F2400
> 22:47:31.385: ok 54
< 22:47:31.385: N55 G1 E600.00 F2400
> 22:47:31.387: ok 55
< 22:47:31.387: N56 G1 X0.00 Y0.00 F2400
> 22:47:31.389: ok 56
< 22:47:31.389: N57 G1 Z0.00 F2400
> 22:47:31.391: ok 57
< 22:47:31.391: N58 G1 E650.00 F2400
> 22:47:31.393: ok 58
< 22:47:31.393: N59 G1 X0.00 Y0.00 F2400
> 22:47:31.396: ok 59
< 22:47:31.396: N60 G1 Z0.00 F2400
> 22:47:31.545: ok 60
< 22:47:31.545: N61 G1 E700.00 F2400
> 22:47:31.547: ok 61
< 22:47:31.547: N62 G1 E750.00 F2400
> 22:47:31.549: ok 62
< 22:47:31.549: N63 G1 E768.00 F120
> 22:47:31.552: ok 63