Axis compensation

Comments

• mattr254

  February 2015

  // #################### Z-Probing #####################

  
  

  #define FEATURE_Z_PROBE 1

  #define Z_PROBE_BED_DISTANCE 10

  #define Z_PROBE_PIN ORIG_X_MIN_PIN

  #define Z_PROBE_PULLUP 0

  #define Z_PROBE_ON_HIGH 0

  #define Z_PROBE_X_OFFSET 0

  #define Z_PROBE_Y_OFFSET 0

  #define Z_PROBE_WAIT_BEFORE_TEST 0

  #define Z_PROBE_SPEED 2

  #define Z_PROBE_XY_SPEED 150

  #define Z_PROBE_SWITCHING_DISTANCE 1

  #define Z_PROBE_REPETITIONS 1

  #define Z_PROBE_HEIGHT 40

  #define Z_PROBE_START_SCRIPT ""

  #define Z_PROBE_FINISHED_SCRIPT ""

  #define FEATURE_AUTOLEVEL 1

  #define Z_PROBE_X1 20

  #define Z_PROBE_Y1 20

  #define Z_PROBE_X2 160

  #define Z_PROBE_Y2 20

  #define Z_PROBE_X3 100

  #define Z_PROBE_Y3 160

  #define FEATURE_AXISCOMP 1

  #define AXISCOMP_TANXY .052

  #define AXISCOMP_TANYZ 0

  #define AXISCOMP_TANXZ 0
• mattr254

  February 2015

  Think I might have figured it out Have to enable Auto Level from the EPPROM Menu. Once I did noticed a very large shift at 20. Might be nice to include that in the firmware information...