Bl touch folger tech ft-5 diamond hotend upgrade

DkzEliteRene

Hi Guys Thanks for accepting me in this group

I need af repetier guru...

Problem:
I bought a  Bl touch (non copy Shit)

I have mounted everything like this (except sensor is on Z Max stop...


Before The million dollar question some info:

Machine Folgertech ft-5 diamondhead upgradet
MKS Gen 1.4 board
Running repetier firmware (obvious)
Every thing is solded together an there are no lose ends

Okay does somebody have the configuration h file for a working Bl touch?

Does somebody know how I activate servos1 (gcode)?

PIN Name for det servos1? (not digital pin 11)

Firmware :
http://reprap.me/media/support/firmware/FolgerTech/Repetier-Firmware-Diamond-FT-5.zip

DkzEliteRene

The gcode command M340 dosent work either

MartinH

for M340 to work, you need to enable servo support

in your config.h

#define FEATURE_SERVO 1

DkzEliteRene

Thank you :-)

Do you have a config h file i can copy and learn from?

regards Rene

MartinH

This is my config.h, i dont use a mks board but the rest of the settings should be relevent.

It uses a 3Dtouch as the Z min endstop and allso for bed probing

https://drive.google.com/file/d/0B7pWunHO-VN6Qk5LNUpmSnZQdkU/view?usp=sharing