Temperature Management for duale extruder

valerian

Hi!
I've got some trouble with my temp management.
1 : Where can 'I select different temp for ext1 and ext2 ( abs and pva ). I've searched everywhere and I've just found "temperature offset" but it changes nothing.
2 : When I start print, the two temp ( ext 1 & 2 ) go all alone at 235° and I don't know why. Everywhere ( repetier, slic3r) I've noted 245°c
I guess I just forgot THE window who manage all that.

Thanks in advance   

valerian

I read that it was impossible to put tow different temperatures in repetier, is it possible to have such a big bug !? oO

Repetier

Temperature depends on the filament configurations selected and yes, they can be different. That is no problem. Just make sure the slic3r filament settings are correct and you have selected them in host before slicing.

valerian

Thanks for your answer
But I don't find what you talk about
On slic3r
http://www.zimagez.com/zimage/18c96b2e3fd138f2c13336059b5dc336c.php
http://www.zimagez.com/zimage/27d7c12c92febdc4e7753f24573fef7d7.php
On host
http://www.zimagez.com/zimage/44a2ce49af2106fb5a1c63191c8e3bb2b.php
http://www.zimagez.com/zimage/5c3cf404aeeae990032c48eb20ea091de.php
Despite all the "245°" write everywhere the two extruder automatically set at 235° when the print start. I see this "235" nowhere in slic3r, host or eeprom! Oo

Repetier

You are looking at the wrong place.

If you select the slicer tab in host there is a section filament settings where you select you slic3r filament configs per extruder.

valerian

OK ok, not very intuitive ^^
but thanks !