What we do is writing /home/eike/.local/share/RepetierHost/composition0.stl positioned where it should be sliced.  -s posx=0 -s posy=0 tells the engine not to shift around the stl file.

delta RADDS driver stepper 128 nema 17 400 steps

I did a complete download\install of the latest firmware 92.9, added this line to my configuration.h:#define FAST_COREXYZ

M502

hello

Remko you are using the wrong baudrate or wrong port (if you have multiple ports). For that reason no communication occurs and nothing happens.

Hello, My name is Marcelo. I install

Make sure bed coating is set to 0your definition for z probe height is the same. The image just shows the point where it triggers. The fact that your probe does not touch bed makes no difference.

But, even with this fix, upload hex still not doing the job.It now stops at "Uploading firmware binary ...". 

In my case connection works with 0.70.1 similar as with 0.65. Printing stops in about 30min - 2h after start. I have tried with 2 printers (Andciv CM3E 3D  motherboard). Log of both test prints/ prin…

You need a z probe

I have two equal printers with motherboard Andciv CM3E 3D. I had problems with connection also with server version 0.65 but after installing new Windows 7 computer I almost get rid of those problems.…

First, verify that your probe is working with a G31. Does it toggle correctly? If you have a mechanical normally closed probe like mine, then #define Z_PROBE_PULLUP needs to be set to 1 before G31 wi…

My print jobs do not stop but I get.: Warning: Missed line detected - correcting buffer usage.

I suppose I could post-process my gcode, and add in lots of G201 to make the extra motor keep up, but it seems like it would be easier to make it use the value for z height.

#define SDSUPPORT 0should be

I replaced my Mega2560 and everything is back to "normal." xyz manual movements seem normal. M119 produces this: <endstops hit: x_min:L y_min:L z_min:L>I entered G28 and Nozzle moved …

hi, i got a problem... My printer is stoping many times in middle of a impression and show this message "resend: in the Log and stoping a few seconds 

I've changed Printer Settings->Extruder->Max bed temperature to 120 for an ABS print.  However, when it gets past 90C, I get an error on the LCD screen of the printer saying MAX BED TEMPERATURE…

-its m5."You need to set this in eeprom normally which may explain why it has no effect."