Recently flashed .92 to my 3 week old Davinci 2.0 Duo (J37 board) and  after going through the entire process, and starting over..

jumped 37 and started over.

Check pins.h lin e893 whcih looks like

No latest dev version (after I wrote this) would do. Make sureEnable JSON formated info output for ESP8266 Duet web interface, PanelDue (JSON_OUTPUT) in config tool is enabled.

What do you mean with "constant error message..." - I see only one and then everything is ok.

#33 0x0000000000000000 in  ()

I have tried connect fan 1 in the first fan port to? but nothing happens?

Hello All. Hello Repetier,I want to set the laser to HEATER_1, but now the laser is ineffective

What we do is writing /home/eike/.local/share/RepetierHost/composition0.stl positioned where it should be sliced.  -s posx=0 -s posy=0 tells the engine not to shift around the stl file.

delta RADDS driver stepper 128 nema 17 400 steps

I did a complete download\install of the latest firmware 92.9, added this line to my configuration.h:#define FAST_COREXYZ

M502

hello

Remko you are using the wrong baudrate or wrong port (if you have multiple ports). For that reason no communication occurs and nothing happens.

Hello, My name is Marcelo. I install

Make sure bed coating is set to 0your definition for z probe height is the same. The image just shows the point where it triggers. The fact that your probe does not touch bed makes no difference.

But, even with this fix, upload hex still not doing the job.It now stops at "Uploading firmware binary ...". 

In my case connection works with 0.70.1 similar as with 0.65. Printing stops in about 30min - 2h after start. I have tried with 2 printers (Andciv CM3E 3D  motherboard). Log of both test prints/ prin…

You need a z probe

I have two equal printers with motherboard Andciv CM3E 3D. I had problems with connection also with server version 0.65 but after installing new Windows 7 computer I almost get rid of those problems.…