deesun
About
- Username
- deesun
- Joined
- Visits
- 20
- Last Active
- Roles
- Member
Comments
-
it did not the same, the printer finished a 10 h print with repetier host. so the printers hardware is ok.
-
i paused only after it already has stopped moving. i also tested my 2nd printer on the server, worked fine, tried the 1st one, same issue... disconnected usb cable and connected to another port on the pi, now it prints, lets see how long. the comma…
-
this time it happened within the first 5 layers. i was here and checked the ressources of the pi 2: ram was at 61 MB from 1024 and CPU usage at 26% the printer slowed down, began to stutter and made a pause between every move for about a half second…
-
it happened again. at first it came to a short stop during the print, 1 hour after i started, but the printer continued the print until about 50% of the part, then it just stopped to send movement commands to the print. i paused the print and was ab…
-
ok, now i did the 8 gb sd card from the B + in a raspberry 2, without changing anything. im going to do a testprint, and if it stops i check the log and the ressources of the pi 2. yesterday night, i wanted to print from a pc, everything went fine …
-
thanks for your reply, and yes, youre right, a simple restart fixes the problem until it shows up again. i tested it, and it was the same layer last time it came to the stop but mostly its random. the pi runs on a 8 gb card, this means he only has 2…
-
yes, i changed them now to the sugested ports. thank you
-
after a sleepless night i got it working now... but with marlin, not with repetier the problem(s) was/were: 1. the eeprom, i forgot to overwrite it on some tries, but not on all of my tries. and i did not know, it has to set to defaults M502 befor…
-
since the Z_PROBE_HIGH value does not work, i changed the ENDSTOP_Z_BACK_ON_HOME value to 0.35 and add to the beginning of the g-code: G28G32 S2G28 this way the print starts in the right high for the first layer and i can see the Z axis moving while…
-
update: after i changed this value: ENDSTOP_Z_BACK_ON_HOME from 0 to 1.1, the probing process worked.now it reaches every measure point, BUT it grinds on the bed while moving from one point to the next, because it still does not lift the Z axis afte…
-
i use chrome. now i figured out what the problem is... its not really a bug, i think. the 1st printer, stays connected to the server (pi b+) all the time and is online, while i have the 2nd disconnected to upload new firmware from a PC. when i disc…
-
it already runs the 0.92.3 version, and why does it say -2 after it hit the bed and not stop there and say 0 or go to 0??it moves for additional 2 mm... i don´t want this and i have no idea how to tell it to move 2 mm back up after probing. EDIT: ok…
-
settings: // #################### Z-Probing ##################### #define FEATURE_Z_PROBE 1#define Z_PROBE_BED_DISTANCE 1#define Z_PROBE_PIN ORIG_Z_MIN_PIN#define Z_PROBE_PULLUP 1#define Z_PROBE_ON_HIGH 1#define Z_PROBE_X_OFFSET 0#define Z_PROBE_Y_O…
-
no the temperature numbers in the right lower corner do the same... is frozen. the only realtime temp display wich works is the chart. i tested it with marlin and repetier firmware and on every other software it works. the problem only occurs on th…