Rossini
About
- Username
- Rossini
- Joined
- Visits
- 686
- Last Active
- Roles
- Member
Comments
-
I already tried this fix but didn't solve the dual z endstop problem. I wrote in the other tread that i have a problem with dual z endstops but the original thread poster doesn't have dual z endstops. I think this are two separate issues so i open…
-
/* This file is part of Repetier-Firmware. Repetier-Firmware is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either vers…
-
Hmmm, looks like multiple z-endstops are not working with fast_corexyz. With only one z-max-endstop my z-axis works.
-
What hardware do you use? I also try to use FAST_COREXYZ and my Z-Axis never moves. It just resets the Printer. Maybe insufficient ram?
-
so, why was it working and now it doesnt work anymore after a firmware update?
-
anyone?
-
https://www.repetier.com/firmware/dev/index.php this is the latest dev version of the firmware configurator.
-
Glad you can reproduce it. On my setup i can reproduce it very easily. I hope you find a solution, as for me the manual controls are almost worthless for me now.
-
Yeah i hope so.
-
Well, on a delta the z-height could vary a lot because of different build plates. But it is fine for me. But what i really find annoying, is the fact that the host shows some coordinates which has absolut nothing to do with reality. Wouldn't it be…
-
yeah ... the emergency button is not very visible
-
I think a lot of people are a little confused on the Probe Points. Because it is possible to describe a rectangle with 3 Points where the third point only describes the height and not the angle too. With 3 Point Measurement on a Delta you would meas…
-
Thanks for your answer. Next time i compile firmware, i will activate USE_ADVANCE and try out some values. Any good sample stl to test the effect?
-
@xBot150: the link is in the article you posted
-
FYI if you want only the Slic3r Prusa Edition then download it from here: https://github.com/prusa3d/Slic3r/releases Question: do you plan to integrate it with more features e.g. variable layer height; individual infill ....Any release plan for next…
-
unstable 5v supply? Don't know.
-
So did you just define EXT0_TEMPSENSOR_TYPE 13and #define EXT0_TEMPSENSOR_PIN THERMOCOUPLE_0_PIN ? On which voltage did you connect it? 3,3 or 5v? I maybe get also a pt100. Thanks
-
First solution is a simple switch. Only able to detect if a filament is empty or not.Second solution is a encoder like the sparklab. Also able to detect a jam. You find it in the configurator.
-
do you know http://doku.radds.org/thermocouple/ do you really use a RADDS and repetier firmware. i think your configs are for ramps with marlin.
-
I'm too on the 0.75.1 release. And have this issue too. Sometimes it doesn't count and i have while printing layer 0/xxx and sometimes it counts completely wrong e.g. counts at layer 90 to 110 and not counting before or after.I encounterd this issue…
-
i think you are compiling for the wrong board. you have to install the bords for DUE. not duemilaneov
-
Well ok. Confused
-
But this answered not my question why "electronical, normaly open" doesn't work as the hall-e endstop has signal 0v untriggert. I never had enabled pullups.
-
can anyone answer my question? i tried now with electronic normally closed and now the endstops are functional. but why? seems totally unlogic for me. do i risk any damage with this? thanks
-
what i forgot: repetier-firmware configuration tool for version 0.92.9 version