Omnimusha
About
- Username
- Omnimusha
- Joined
- Visits
- 68
- Last Active
- Roles
- Member
Comments
-
z-probe measured THE REFERENCE ??
-
Z-OFFSET, HOW ARE THE STEPS FOR A SMALL SPACE BETWEEN THE BED AND THE EXTRUSER, TO BE ABLE TO PRINT?
-
PRINTER CARTESIAN./bl touch tools BED HEIGHT MAP steps:1) G1 Z10NO MENSURE 2) BOTON: MENSURE HEIGHT3) BOTON COPY PASTE:4) G33: CORRECTION1) G1 Z10 CORRECTION MENSURE 2) BOTON: MENSURE HEIGHT ???, IT'S OKAY ?
-
thz
-
/* This file is part of Repetier-Firmware. Repetier-Firmware is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either…
-
Ramp 1. 4 adn bl toch https://goo.gl/images/UWAHKU
-
Enable Z-probing (FEATURE_Z_PROBE) Enable axis compensation (requires z-probing enabled, even without z-probe available) #define FEATURE_AXISCOMP 1 #define AXISCOMP_TANXY 0.176 // 10 grados #define AXISCOMP_TANYZ 0 #define AXI…
-
I have to enable this, to make it work ?? Enable z-correction (DISTORTION_CORRECTION)
-
No found
-
#define FEATURE_AXISCOMP 1 #define AXISCOMP_TANXY 0.017 #define AXISCOMP_TANYZ 0 #define AXISCOMP_TANXZ 0 Values are stored in eeprom
-
I have to do something else ?. It does not change me, it follows the same error.
-
Hi. I can pass the modified files. I do not understand how to do it. I tried but I could not. Thank you.
-
G92 Z0
-
-
Hi, I need to know how to calibrate the z axis, I need to move the axis at a certain distance and then tell the machine that it is the zero point. ..
-
-
Hl. Which laser can use to make pcb and cut.?? Link. EBay?
-
How to calculate Steps per mm ?? StepsPerTurn / pulley length
-
What hardware to use to control on / off?
-
Okay, I got it, thank you. To put a drill, control its speed which driver can be used?
-