› ›

No printers showing on server but only on PC

FestivejellyFestivejelly
in Bug Reports
When I try to access my repetier server via chrome on the PC it shows no servers just the header with not much on.

If I go to the same address on my iphone it loads fine. I see no issues in the console in chrome dev tools and ive tried a hard refresh. Its very odd.

I would attach a pic but this forum doesnt allow me to do that.

Comments

  • RepetierRepetier
    You can store images using https://imgur.com/ and post url here.

    I also find it very odd considering that we develop using chrome. Did you try deleting browser cache? Also did you check network tab (open before reloading) if some file downloads fail?
  • RepetierRepetier
    Forget to ask - on which OS and chip type arm/inter 32/64 bit is the server running in case it depends on the variant.
  • KSaschaKKSaschaK
    Repetier said:
    You can store images using https://imgur.com/ and post url here.

    I also find it very odd considering that we develop using chrome. Did you try deleting browser cache? Also did you check network tab (open before reloading) if some file downloads fail?

    I have a comparable problem. Everything was working, and the printer was shown until I tryed to activate the Licence via the web interface for the Pro Version. Activation took odly long and after shutting down the webpage everything was gone except the displayed page. I would be nice if you can help with that, because I wanted to include RepetierServer with a bunch of more printers in our university. 

    <a href="https://ibb.co/bbrWQdS"><img src="https://i.ibb.co/ph30bXt/Repetier-Server-Error.png" alt="Repetier-Server-Error" border="0"></a>




  • Repetier_SupportRepetier_Support
    KSaschaK said:
    Repetier said:
    You can store images using https://imgur.com/ and post url here.

    I also find it very odd considering that we develop using chrome. Did you try deleting browser cache? Also did you check network tab (open before reloading) if some file downloads fail?

    I have a comparable problem. Everything was working, and the printer was shown until I tryed to activate the Licence via the web interface for the Pro Version. Activation took odly long and after shutting down the webpage everything was gone except the displayed page. I would be nice if you can help with that, because I wanted to include RepetierServer with a bunch of more printers in our university. 

    <a href="https://ibb.co/bbrWQdS"><img src="https://i.ibb.co/ph30bXt/Repetier-Server-Error.png" alt="Repetier-Server-Error" border="0"></a>




    Hello, due to a expired certificate, you have to install a patch from us. See here in the FAQ: https://www.repetier-server.com/knowledgebase/license-activation-fails/
Sign In or Register to comment.