› ›

Extruder 2 start heating when it starts to print

hokanphokanp
in CuraEngine

Hi


Have adual extruder. When start Printing heatbed and extruder 1 is heating op but not extruder 2. When heatbed and extruder 1 is up to temp, it starts the print and the heating of extruder 2, it is the support som it does not get heated Before is starts to print. How to solve this?

I solve it but start it manually.

Comments

  • RepetierRepetier
    Make sure the start gcode contains something like

    M109 T1 S200

    to heat up and wait for target temperature. Mest is to add first
    M104 T1 S200
    before all M190/M109 commands so all heat in parallel before waiting. I guess your start gcode just has wrong initialization here.
  • hokanphokanp

    Hi

    Thank you

    I have this code:

    ; Default start code
    G28 ; Home extruder
    G1 Z15 F800
    M107 ; Turn off fan
    G90 ; Absolute positioning
    M82 ; Extruder in absolute mode
    {IF_BED}M190 S{BED}
    ; Activate all used extruder
    {IF_EXT0}M104 T0 S{TEMP0}
    G92 E0 ; Reset extruder position
    ; Wait for all used extruders to reach temperature
    {IF_EXT0}M109 T0 S{TEMP0}

    {IF_EXT1}M109 T0 S{TEMP1} Can I do like this?

    BR

  • RepetierRepetier
    Yes but do not forget
    {IF_EXT1}M104 T1 S{TEMP1}

    as well for faster heating.
  • hokanphokanp

    Thank you for your help=)

    BR

Sign In or Register to comment.