› ›

Alpha724

About

Username
Alpha724
Joined
Visits
22
Last Active
Roles
Member

Comments

  • Thank you all for your input and help.
    in Autolevel first point is off the bed Comment by Alpha724 May 2017
  • I couldnt get the errors ironed out but i got marlin working flawless with my bltouch......even though it tired it several times before not sure what happened this last go but its working great. So repetier is taking a back burner for a while till i…
    in Autolevel first point is off the bed Comment by Alpha724 May 2017
  • My Probe is to the left of the nozzle, but even with that said when it goes back right it still continues to lower into to the bed for a second or two then raises back up. Ive also noticed that onces its done homing Z it moves back to X0 and lowers …
    in Autolevel first point is off the bed Comment by Alpha724 May 2017
  • I will check and see. Do you have any idea why it moves to the left when its homing Z then when its finished it moves back right?
    in Autolevel first point is off the bed Comment by Alpha724 May 2017
  • So first point is hitting fine now, and when Z homing it goes to the center stops to drop moves to the left and once its done probing moves back to the right and continues to plow into my bed.....what in the world is causing that?
    in Autolevel first point is off the bed Comment by Alpha724 May 2017
  • I have used both the 0.92.x and dev version. Both give me the same issues. **Edit** So some how I redownloaded and flashed and magically my first point is hitting. What is the proper start GCODE for printing?
    in Autolevel first point is off the bed Comment by Alpha724 May 2017
  • OK,so I used M502 and it said it loaded defaults and then M500 and when I issued G32 it still only moved over 25MM. I am not sure whats going on. Any other idea?
    in Autolevel first point is off the bed Comment by Alpha724 May 2017
  • Well now that may fix my whole issue. With the original X1 value being 20 that may account for the 25mm move....I will try that and let you know. Thank you!
    in Autolevel first point is off the bed Comment by Alpha724 May 2017
  • Reflashing the Firmware wouldnt reset eeprom? I will try double checking what EEPROM has for cords but I have tried all 3 options for leveling, Each time it only moves 25 mm from X home and tries to probe which is off the bed.Any way to change the …
    in Autolevel first point is off the bed Comment by Alpha724 May 2017
  • Thanks for responding MartinH, however I have changed the X1 value as the Y is moving enough but the carriage never moves more than 25 mm away from Home for the first point. If i trigger it by hand it will move to the next point. If needed I can try…
    in Autolevel first point is off the bed Comment by Alpha724 May 2017