vincen
About
- Username
- vincen
- Joined
- Visits
- 9
- Last Active
- Roles
- Member
Comments
-
victorprieto said: Vincen, Any success with the homeassistant integration? I would like to do it, but i'm not sure on how to doit. Unhappy I have been very busy these last months and so didn't get time to give it a try yet Let me know if …
-
Repetier said: These are also wrong port names, so I do not really wonder they do not work. Right name is ttyUSB0 or ttyAC... You can call ls /dev/tty* with and without printer connected. The one that disappears is the port you search. I kno…
-
So far I have installed Repetier on it easily (with armhf64 package as you indicated I have imported my printer settings and I expected to have just the USB port to adjust. Unhappy whatever port I select, connection status sort of blink (red most o…
-
Repetier said: arm-hf is what you want to run. If you want to use the pro version make sure ethernet always gets same mac address. I think it was the orange pi that liked to change mac addresses after reboot. Thanks for clarification For…
-
Repetier said: Yes, copying config folders is easier. SLic3r is normally in $HOME/.Slic3r and host settings are in .mono/Software/... Perfect, copied the .Slicr3PE in home, and the repetier folder in .mono and everything is there in Repet…
-
Repetier said: In slicer you define filaments. Set the temperatures etc. accordingly and just select the right filament type before slicing and slicer will use these temperatures and flow multiplyer. In some cases where speeds differ very mu…
-
Repetier said: Could be a memory problem. If you have no display check /home/pi/.bash_rc near and and remove the start of xinit, that will save quite some memory. I guess you speak about this: #if ! pgrep "xinit" > /dev/null #then # …
-
Repetier said: See docs page on our homepage https://www.repetier-server.com/documentation/ Under "For Programmers". I think you want the web API. Oups missed that Thanks for link and will check what I can do to get datas and stats of R…
-
Repetier said: If the linux + board + display combo works as touchscreen, the server will also work if you can setup chrome as fullscreen browser. It will select the biggest available resolution from a preset list that fits inside. 320x240 is…
-
killmoinsneuf said: Hello dudes,The french translation supplied with Repetier-Server is incredibly bad, with a lot of lacks, misinterpretations, errors, errors of orthography ... It is mandatory to switch to english language, to prevent menus…
-
Repetier said: With ethernet you can always get access. I know to far away but a pi is small and can be moved for installation. If you had deleted the delete password as described in image faq it should not ask for password anyway. Oki s…
-
Repetier said: If you use the standard image and install server there, you would use wpa_supplicant to store your single password. But this system does not allow AP which is why we are using networkmanager, and since we wanted to make it easy…
-
Thanks for the explanation so I better understand the problem but it still doesn't resolve my issue that it doesn't connect anymore at my AP now Isn't it possible to code AP/pass/crypt in a file so he can use it at startup ? I get very strong signa…
-
RAyWB said: believe me it´s better to have the noise than having Filament blocking the hotend ;-)i´m a little experienced in these e3d clones , don´t try to run it without the fan Yep I know fan must run always when it's printing but …
-
Sorry for confusion but I indicated it's fan for noze not for the print itself Right now fan blows all the time as soon as whole system is powered ! I checked details of the Electronic board and fan is plugged on permanent power so it looks like it…
-
Thanks, your are right ! none of these commands have any effect on fan so I checked more in details on electronic board so it looks like it's electronically not possible with my board
-
Oki sounds like I made a big misurderstanding Thanks for the tip about M115 and in fact the board of the printer is running Smoothieware firmware ! Once selected in config of printer in Repetier Server everything went smoothly Right now I started …