› ›

kg4iae

About

Username
kg4iae
Joined
Visits
28
Last Active
Roles
Member

Comments

  • After 2 months of struggling with this issue I finally fixed it.  Turned out to be a bad heater cartridge.  I had no idea those things could go bad.  Also, I've noticed on my JG Maker Magic machines, RS does exactly what I proposed in my previous co…
    in Send notification when bed temperature is below X Comment by kg4iae January 2022
  • Could you provide a sample and instructions on how to set this up?   I think this may be a fix I need. I have an issue with my prusa MK2.5.  When the hot-end temp drops below a certain threshold the printer goes into "thermal runaway".   Currently …
    in Send notification when bed temperature is below X Comment by kg4iae October 2021
  • I have a follow up question regarding this topic...  I built the scripts to turn the lights on and off, and it works fine from the main screen ("Gear" menu).  I would like to configure it so the "Lights ON" script runs when a print job starts, and t…
    in Plugin for Home Automation Comment by kg4iae April 2019
  • I've been trying to do this too.  I realize from previous comments I can't get the time left.  I can't seem to get the printTime or Time elapsed.  I tried "stateList" but it doesn't show any times.  I've also tried "listJobs", "listModels", and "res…
    in Gettings the remaining time with the api Comment by kg4iae April 2019
  • There is a config setting to fix this.  I had this problem early on.   Go to the settings, then look in the "Temperature" tab.  You need to check the setting "Wait for temperature controller to stabilize before beginning build" I'm pretty sure thi…
    in Printer Does Not Start Printing when Using Simplify3D Comment by kg4iae May 2017
  • Mike, I am running R-server on a Raspberry PI.  I added a touch screen interface to the PI.  I can start projects by using the touch screen.  Saving to SD card is not really necessary anymore.  BTW, you can use a computer monitor, and a mouse, if yo…
    in Save to SD Card Comment by kg4iae May 2017
  • I'm curious about this as well.  I have it running on a Raspberry Pi 2.  In the past I had it running on an old Dell laptop running Ubuntu linux. From what I understand, CHIP uses a modified version of Debian.  I see no reason why you couldn't insta…
    in How hard would it be to run repetier server on a C.H.I.P. computer? Comment by kg4iae February 2017
  • Just in case someone else is trying to do this... Turns out you can connect the two apps using a CURL script. Basically you will need to install CURL.  Then add this command to your "Starting Script" tab of your S3D Settings.  (The same place where …
    in Upload directly to Server Comment by kg4iae February 2017
  • I like this idea.  I think the sound of my printer is very cool.  Especially when it's printing circles.   Not sure about a diagnostic tool, but it would be great for demo purposes.  I frequently do live streams for people when I'm printing a custom…
    in Audio streaming Comment by kg4iae February 2017
  • I had a similar problem.  Connecting locally on the same network, it works fine.  When connecting remote (using my cell phone), I get the "Lost connection" error, over an over.  Sometimes it happens about 10 times and then starts working, but most o…
    in Erratic web server behavior Comment by kg4iae May 2016
  • I've been using it for a few weeks now.  I am uploading files from S3D to the R-Server folder.  I just figured out that you can click the "Direct Print' button at the top, and it will let you choose a file that is in one of your import folders.  Tha…
    in Save to SD Card Comment by kg4iae May 2016
  • StephanK, I also requested your PS2.  The latest version (.75) does have this functionality.  You can "samba" a file into a folder, but to print it, you still have to use the interface, and move it from the folder to the print queue.  It's actually …
    in Save to SD Card Comment by kg4iae May 2016