[Sat Mar 28 12:01:22 2020] sd 0:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08

#0  futex_abstimed_wait_cancelable (private=0, abstime=0xaab3ed8c, expected=1, futex_word=0x41b9c8) at ../sysdeps/unix/sysv/linux/futex-internal.h:205

 o: cleaning up resources allocated by server thread #00

Thread 21 (Thread 0xab0f9450 (LWP 19981)): #0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46 #1 0xb6f20072 in futex_wait_cancelable (private=<optimized out>, exp

#0  __libc_read (nbytes=1020, buf=0x25980d4, fd=19) at ../sysdeps/unix/sysv/linux/read.c:26

#0  0x76c13d00 in __GI___sigtimedwait (set=set@entry=0x7ef97a30, info=info@entry=0x7ef97884, timeout=timeout@entry=0x0) at ../sysdeps/unix/sysv/linux/sigtimedwait.c:29

control interface '/run/wpa_supplicant'.#012You may have another wpa_supplicant process already running or the file was#012left by an unclean termination of wpa_supplicant in which case you will need

Here's a video, the machine is up to temp #1 moves with the Homing of Z and #0 does not move. Sound is LOUD!

Hi, I run two extruders to double my output using a RamBo board. When first connecting, (when up to temp) and I extrude, only #0 spins. Once I start a print, the #1 extruder spins and continues to mir

* Connected to <IP> (<IP>) port 3344 (#0)

When i home the printer 0,0 puts extruder #0 over the lower left corner of the bed (which is ok).. So extruder #0 (in the middle is right now the only active extruder (until i get longer frame rails).

Since the extruders start at #0, wouldn't Ext0 actually be #1, ext1 being #2 and ext2 be #3??

#0  0x00007ffbe4b390c3 in epoll_wait () from /lib/x86_64-linux-gnu/libc.so.6

#0  0x000000000088aed2 in repetier::GCode::getAscii(bool, bool, boost::shared_ptr<repetier::Printer>, bool) ()

#0  0x00007f8e1d23015f in pthread_cond_wait@@GLIBC_2.3.2 () from /lib/x86_64-linux-gnu/libpthread.so.0

#0  0x00007f8e1c4bc0c3 in epoll_wait () from /lib/x86_64-linux-gnu/libc.so.6

Ext #0 is actually the far right extruder, so my probe offset needs to be x20 y-20 since the physical probe is 20mm to the right and 20mm forward of the extruder.

Extruder 0 is the one on the right. When I home all axis, this puts the extruder unit at 0,0 and extruder #0 as close to the outside edge of the bed as is physically possible, if i select extruder #2

(gdb) thread apply all bt Thread 33 (Thread 0xb6a40450 (LWP 738)): #0 0xb6eafb30 in __pthread_cond_timedwait (cond=0x3201410, mutex=0x32013f8, abstime=0xb6a3fda8) at pthread_cond_timedwait.c:199

#0  pthread_cond_timedwait@@GLIBC_2.3.2 () at ../sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S:225