-
Help me to connect oled SSD1309
by Repetier ·#ifdef U8GLIB_SSD1306_SW_SPI -
second UART for Bluetooth isnt working after upgrade from 0.9.2 to 1.0.1
by gepardya ·#ifdef RAMPS_V_1_3 -
Linear advance extruder stops
by overdrive ·#ifdef SUPPORT_MAX6675 -
extruder / part cooling Fan
by silver1882 ·#ifdef RAMPS_V_1_3 -
Having trouble with new printer using v 1.04 and Repetier Host. OK w/ factory Marlin using R. Host
by Repetier ·#ifdef DEBUG_PRINT -
Repetier 1.0.3 | Blank LCD after upgrading | Printer: Hatchbox Alpha | LCD: SCM12864F
by Repetier ·#ifdef U8GLIB_ST7920 -
Custom Kinematics
by Repetier ·#ifdef FAST_COREXYZ -
Integration of RADDS2LCD
by Hogen ·#ifdef UI_FONT_6X10 -
Firmware Configuration Issues
by MartinH ·#ifdef RAMPS_V_1_3 -
MKS MINI 12864 on a RUMBA
by SlickNickeL ·I believe #ifdef U8GLIB_MINI12864_2X_SW_SPI is for a two row, small LCD -
MKS MINI 12864 on a RUMBA
by Repetier ·#ifdef U8GLIB_MINI12864_2X_SW_SPI -
The heatbed heats automatically if the second extruder is on
by blastactionhero ·#define RAMPS_V_1_3 // #define RAMPS_V_1_0 #ifdef RAMPS_V_1_3 #define ORIG_X_STEP_PIN 54 #define ORIG_X_DIR_PIN 55 #define ORIG_X_ENABLE_PIN 38 #define ORIG_X_MIN_PI -
problems with second extruder.
by terzyans ·#ifdef RAMPS_V_1_3 -
How Can I achieve Continuous SPI Master Clock from PIC SPI?
by Paullo ·#ifdef DEBUD_LOG -
Problem with TMC2130 and SPI
by stefanokolos ·#ifdef TMC2130DEBUG -
manual positioning / Jogwheel
by Lexar ·#ifdef DEBUG_PRINT -
G0 default speed in CNC mode
by Lexar ·#ifdef DEBUG_QUEUE_MOVE -
Problem with TMC2130 and SPI
by stefanokolos ·#ifdef TMC2130DEBUG -
Repetier 1.0.0 + Due + RADDS 1.5 + RepRapDiscount Full Graphic Smart Controller 128x64
by ZiguleBigule ·#ifdef UI_MAIN -
Help with SD-Pause position and behavior
by Repetier ·Printer::maxFeedrate[E_AXIS] / 2);#ifdef CNC_SAFE_Z if(Printer::mode == PRINTER_MODE_CNC) { Printer::moveToReal(IGNORE_COORDINATE, IGNORE_COORDINATE, CNC_SAFE_Z - Printer::coordina