-
Firmware Update Melzi 2.0v5
by jacksonaarond ·#elif 0 -
Radds 1.5 und Reprap World GLCD
by UPS ·#elif MOTHERBOARD == 402 // RADDS with RADDS2LCD Adapter -
Preraise on z-home not working.
by Repetier ·#elif ZHOME_PRE_RAISE == 2 -
@execute in 0.92
by wiring ·Das hört sich ja schon mal positiv an. Also aktuell habe ich ein bash script namens repetier.sh welches per sudo aufgerufen wird. Der lenkt die ganzen Funktionen an andere Scripts weiter welche jedoc… -
Home all: X/Y axis is driving against endstop
by Repetier ·#elif HOMING_ORDER == HOME_ORDER_XZY -
On heat up of extruder 2 temp change is displayed at same time for both extruders ?
by Mikelangelo ·#elif HAVE_HEATED_BED -
Cable Robot using Repetier
by Jagi ·#elif DRIVE_SYSTEM == CABLE_ROBOT -
Configuring LCD2004 5 Button (from Anet/Melzi/Zonestar etc.) with Ramps 1.4
by opy01 ·#elif MOTHERBOARD == 33 // RAMPS -
sd card does not work no 1.0.2
by csmith ·#elif MOTHERBOARD == 408 || MOTHERBOARD == 413 -
Dual X carriage printer - cooling fan
by Repetier ·#elif FEATURE_CONTROLLER == CONTROLLER_SPARKLCD_ADAPTER || FEATURE_CONTROLLER == CONTROLLER_ORCABOTXXLPRO2 -
RAMPS-FD + Geetech RAMPS-FD Adapter + RepRap Full Graphics Smart Controller
by Repetier ·#elif MOTHERBOARD = 403 || MOTHERBOARD = 404 -
Custom Kinematics
by Repetier ·#elif DRIVE_SYSTEM == YX_GANTRY -
Firmware CoreXY + DualX help
by mael ·#elif DRIVE_SYSTEM == YX_GANTRY -
Integration of RADDS2LCD
by Hogen ·#elif (FEATURE_CONTROLLER == CONTROLLER_RADDS_LCD_16X2) -
Firmware Configuration Issues
by MartinH ·#elif MOTHERBOARD == 34 -
MKS MINI 12864 on a RUMBA
by Repetier ·#elif MOTHERBOARD == 80 // Rumba has different pins as RAMPS! -
Problems Setting up Viki 2 on Rambo v1.4
by rmb54 ·#elif MOTHERBOARD == 301 // RAMBO #define SDCARDDETECT 72 // sd card detect as shown on drawing#undef BEEPER_PIN#define BEEPER_PIN 33// Display A0#define UI_DISPLAY_D5_PIN 70// Display CS#def -
Anet A8 ( Melzi ) v1 firmware problem
by Repetier ·#elif ZHOME_PRE_RAISE == 2 -
The heatbed heats automatically if the second extruder is on
by blastactionhero ·(BELT_PITCH * PULLEY_TEETH) #elif DELTA_DRIVE_TYPE == 1 /** \brief Filament pulley diameter in milimeters */ #define PULLEY_DIAMETER 10 #define PULLEY_CIRCUMFERENCE (PULLEY_DIAMETER * 3.1415927) -
Webcams werden immer wieder falsch zugewiesen
by Technology ·So ich habe so gut wie keine Ahnung von Bash-Scripting habs aber hinbekommen (Scripte liegen unter /usr/local/Repetier-Setup/bin). Hab in der startAllCams die Schleife angepasst: