-
How to read a power loss pin in firmware?
by Repetier ·#define HOST_RESCUE 1 -
Issue with shutdown from the web interface
by gnipp ·Happy new year everybody, -
Two Y Steppers - Only one disables
by jstoltz ·#define FEATURE_TWO_YSTEPPER 1 -
Repetier Server and Klipper
by Repetier ·Repetier-Server is replacement for mainsail. We currently can only talk to klipper directly so no mainsail please. You install klipper from server directly, define config and compile firmware for bo… -
MQTT GPIO
by Repetier ·So nie versucht, aber du kannst ja jedes beliebige topic erfinden und subscriben und bei änderung eine Funktion mit dem neuen Wert aufrufen und da den pin setzen. -
Wait for external signal before executing G-Code command
by Repetier ·delay (5); -
Upgrade to Firmware V2 on Ultratronics Board
by Repetier ·#define DOOR_PIN -1 -
Pin25 on High
by Repetier ·#define MB_SETUP SET_OUTPUT(25);WRITE(25,HIGH); -
stl offsets
by Repetier ·Offset in STL is not relevant. You can not provide bed position in cureengine config in host. It uses the settings in Printer Settings and there you must define x min and y min and bed front and bed … -
image engraving setting
by ockert ·#define SUPPORT_LASER 1 -
there is an abnormal homing issue after printing is completed
by 9yamazaki9 ·Repetier said: -
there is an abnormal homing issue after printing is completed
by Repetier ·This is quite easy to solve. In Repetier-Server you can define what to do before print start and after print finishes or gets aborted. What you see is the default action to go out of the way. -
Seit Update 1.0.2 - Communication Timeout
by andyp79 ·#define NO_TIMEOUTS 1000 // Milliseconds -
Upgrade to Firmware V2 on Ultratronics Board
by plasticman ·Hi There -
@execute command not running before job
by TT_Vert ·Repetier said: -
New Features: Raytracing and Rendering of preview images for stl and g-code
by MartinD ·Repetier said: -
New Features: Raytracing and Rendering of preview images for stl and g-code
by Repetier ·Per folder is bad idea ince you can move them around and that changes no color. -
@execute command not running before job
by Repetier ·/etc/rc.local is fine I think. We just use services to run our scripts, but that is complicted for a personal image so no need to add an own service just for that. -
About SKR2 settings
by Repetier ·#define X_MAX_LENGTH 270 -
About SKR2 settings
by joule5 ·Repetier said: