› ›

Printer Resets after ~1hour printing

moelskimoelski
in General
Hi !

My Printer (SparkCube XL) makes often a complete reset after ~1hour of printing.
I first thought it could be a Problem with the buffer (since I have this stopping issue while printing).
But I set it back to 64.

My Setup is RADDS 1.5 with RAD128 Drivers and raspberry pi 2 as Server.

Any idea what could cause this reboots?
Several prints get lost because of this issue :-(

Dominik

Comments

  • moelskimoelski

    Hier are some additional information:

    >  7:14:39.403: start
    >  7:14:39.404: Info:Watchdog Reset
    >  7:14:39.404: Transformation matrix: 1.000000 0.000000 0.000000 0.000000
    >  1.000000 0.000000 0.000000 0.000000 1.000000
    <   7:14:39.405: N1 M117 ETE 03:34:31

    There is a Watchdog reset. But I have no idea why.

  • RepetierRepetier
    You should enable logging with such problems and then see what exactly happens. Then you see the commands at that time and answer behaviour. You need a 4s pause without watchdog ping to get this, so what were you doing at that moment. Find it out and try to reproduce it.
Sign In or Register to comment.