Webcam with Username and Password

Wapameepto

August 2016 in Feature Requests

Hi,

Is it posible to enter a Username and Password for an ipcamera.

http://username:password@xxx.xxx.xxx.xx/mjpg/video.mjpg

don't work.

Tom

Comments

Repetier

August 2016

Depends on the ip camera. For my ip camera dynamic video needs
http://10.0.1.53/videostream.cgi?loginuse=admin&loginpas=123456

Easiest way is if you have the ui of the camera open and open the image/video with right click ->open image in new tab. Then you should get the full url including required password.

Your url is most likely wrong. If the camera requires digest authentication it will not work.
Wapameepto

August 2016

With vlc Player http://admin:1234@192.168.178.21/mjpg/video.mjpg work fine.
Right click didn't work in my UI form Edimax
Repetier

August 2016

I meant more right clicking in your browser where you see the stream, assuming your ip cam has a web interface.
Wapameepto

August 2016

Snapshot now Works with http://ip adress/snapshot.jpg?account=[USERNAME]&password=[PASSWORD]
Wirth mjpg Stream I dont have a Picture.

Thanks dort your Help

or Register to comment.