Just switched from 1.0.4 to development firmware (via website generator) and printing on my X3D XL CoreXY printer fails immediately with log below. 1.0.4 worked just fine.
08:54:17.324 : N2 M530 S1 L36658
08:54:17.324 : N3 M531 CFFFP_2_1_Tubus_5cm_ESP32-CAM*85
08:54:17.324 : N4 M117 ETE 5h 19m 07s56
08:54:17.324 : N5 G21*31
08:54:17.324 : N6 G9022
08:54:17.324 : N7 M82*30
08:54:17.324 : N8 G28 Z081
08:54:17.335 : N9 G28 X0 Y0*27
08:54:17.337 : N10 G1 Z15 S10037
08:54:17.340 : N11 G32 S2*105
08:54:17.368 : N12 G92 E0116
08:54:17.368 : N13 G1 F200 E3*24
08:54:17.369 : N14 G92 E0114
08:54:17.369 : N15 M117 Printing...*47
08:54:18.630 : RequestStop:
08:54:18.657 : fatal:Homing failed! - Printer stopped and heaters disabled due to this error. Fix error and restart with M999.
08:54:18.660 : fatal:Homing failed! - Printer stopped and heaters disabled due to this error. Fix error and restart with M999.
08:54:18.660 : N16 G28 Z0110
08:54:18.668 : fatal:Homing failed! - Printer stopped and heaters disabled due to this error. Fix error and restart with M999.
08:54:18.671 : N17 M104 S0 T0*23
08:54:18.680 : fatal:Homing failed! - Printer stopped and heaters disabled due to this error. Fix error and restart with M999.
08:54:18.688 : fatal:Homing failed! - Printer stopped and heaters disabled due to this error. Fix error and restart with M999.
08:54:18.701 : fatal:Homing failed! - Printer stopped and heaters disabled due to this error. Fix error and restart with M999.
08:54:18.702 : N18 M140 S092
08:54:18.702 : N19 M530 S0*94
08:54:18.709 : fatal:Homing failed! - Printer stopped and heaters disabled due to this error. Fix error and restart with M999.
08:54:18.717 : Error:Checksum required when switching back to ASCII protocol.
08:54:18.717 : Resend:15
08:54:18.741 : Resend: N15 M117 Printing...47
08:54:18.741 : Resend: N16 G28 Z0*110
08:54:18.741 : Resend: N17 M104 S0 T0*23
08:54:18.741 : Resend: N18 M140 S0*92
08:54:18.741 : Resend: N19 M530 S0*94
08:54:18.754 : fatal:Homing failed! - Printer stopped and heaters disabled due to this error. Fix error and restart with M999.
08:54:18.766 : fatal:Homing failed! - Printer stopped and heaters disabled due to this error. Fix error and restart with M999.
08:54:18.775 : fatal:Homing failed! - Printer stopped and heaters disabled due to this error. Fix error and restart with M999.
08:54:18.788 : fatal:Homing failed! - Printer stopped and heaters disabled due to this error. Fix error and restart with M999.
08:54:18.795 : fatal:Homing failed! - Printer stopped and heaters disabled due to this error. Fix error and restart with M999.
