Hallo,
frohes neues Jahr.
Ich habe jetzt den Fehler gefunden nach deinem Tipp mit der Konsole.
Aber wie bekomme ich den raus?
Send:11:22:48.372:
N14819 G91 ; relative coordinates
Send:11:22:48.372:
N14820 G1 E-1 F300 ; retract filament a bit before lifting
Send:11:22:48.393:
N14821 G1 Z+5 E-5 F6000 ; raise platform from current position
Send:11:22:48.393:
Slow command added:G28 X0 Y0 ; home axis
Send:11:22:48.393:
N14822 G28 X0 Y0 ; home axis
Send:11:22:48.393:
N14823 M114
Send:11:22:48.394:
N14824 G90 ; absolute coordinates
Send:11:22:48.406:
N14825 G92 E0 ; reset extruder
Send:11:22:48.427:
N14826 M104 S0 ; turn off hotend
Recv:11:23:03.595:
Not SD printing (8)
Send:11:23:03.923:
M117 ETA 11:22:56 day 1
Send:11:23:03.930:
N14827 M140 S0 ; turn off heat bed
Send:11:23:03.931:
N14828 M107 ; turn off fans
Send:11:23:03.937:
N14829 M84 ; disable motors
Send:11:23:03.937:
Slow command added:M400 ; Wait for current moves to finish, clearing the buffer
Send:11:23:03.937:
N14830 M400 ; Wait for current moves to finish, clearing the buffer
Send:11:23:03.937:
N14831 M104 T0 S0 ; Disable extruder
Send:11:23:03.938:
N14832 M140 S0 ; Disable bed
Send:11:23:03.938:
N14833 G91
Send:11:23:03.939:
N14834 G90
Send:11:23:03.939:
N14835 G1 X0 Y-130 F9000
Send:11:23:03.990:
@stopLog
Recv:11:23:05.595:
Not SD printing
Send:11:23:06.835:
M117 M117 Finished
Recv:11:32:35.567:
Not SD printing (285)
