How to add this screen to repitier firmware 1.04?

Alex

Hello
I used RUMBA v1.1 a few years with Prusa 3d printer & screen (see pic). Now I finish building of Hbot and after flashing hbot firmware I lost access to screen. Looks like I forgot name of it, I didn't flashed this controller since 2015.

Screen
https://3dtoday.ru/upload/posts/main/M9riArkQH7rXk5UmrWru9s4GgpZ01nx7zv2TcexNqKZyfpceXR.jpg

https://3dtoday.ru/upload/posts/main/c7EhnOgDXZX1wL3aQT5kNOzM0n2he31TUAZqRTJVt42dMCQ3mv.jpg

I tried this screens but still no access to screen
https://3dtoday.ru/upload/posts/main/iV4hbIyeqoVudyeyhZW933VvEijhhvaXf7eUe1CMJAk0EsGOcL.jpg
https://3dtoday.ru/upload/posts/main/GaCJQVqTKxBqkKobeMsfLVMfsPw5XQp6ffFSzPb7Qo0fe72vU9.jpg

May be I have to make changes in configuration.h file ?

Thank you in advance.

Repetier

Looks like a 20x4 character display so first variant is correct. No extra config required. But make sure you map the 2 flat cables correctly and also the rotation. Is not on all as you think. So check some image son internet and watch where the red marked cable is positioned.

Alex

No, second name is right choice, but I had encountered with very strange problem, when I unchecked other languages except english, arduino ide did compilation and started writing but after a while it reported about connection error. It took for me 2 days to understand that problem with unchecked languages.

that how it was looks like

Reading | ################################################## | 100% 0.01savrdude: Device signature = 0x1e9801 (probably m2560) avrdude: reading input file "C:\Users\SSD\AppData\Local\Temp\arduino_build_171813/Repetier.ino.hex" avrdude: writing flash (113348 bytes): Writing | #####avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_getsync(): timeout communicating with programmer avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_getsync(): timeout communicating with programmer avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_getsync(): timeout communicating with programmer avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_getsync(): timeout communicating with programmer avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout avrdude: stk500v2_ReceiveMessage(): timeout An error occurred while uploading the sketch