Arrêt brutal durant l'impression

docman95

Bonjour,
Repetier server 1.0.3 est installé sur une raspi3 à jour. En cours d'impression (sur Alfawise u20 en marlin2.0.x), l'impression s'arrête brutalement. Je n'avait pas le problème avant. J'imprime le même gcode depuis la carte sd sans avoir d'arrêt brutal.
Quel peut être le problème ?
Merci

Hello,

Repetier server 1.0.3 is installed on an updated raspi3. While printing (on Alfawise u20 in marlin2.0.x), printing stops suddenly. I didn't have the problem before. I print the same gcode from the sd card without having a sudden stop.
What can be the problem ?
Thanks

Repetier

Please have a look here for possible reasons:
https://www.repetier-server.com/knowledgebase/print-does-not-finish/<br/><br/>

docman95

Repetier wrote
Please have a look here for possible reasons:
https://www.repetier-server.com/knowledgebase/print-does-not-finish/<br/><br/></div>
Merci, j'ai une alimentation 5v/3A dédiée pour l'écran et une alimentation 5v/3A pour la raspberry. je vais analyser plus en détails mais les alimentations ne semblent pas être à l'origine du problème.

Repetier

As I said in description - check what linux says. But with 2 power supplies it is not very likely:-)

docman95

J'ai commandé des câbles usb 2A spéciales alimentation. Je vous donnerais le résultat des tests.

docman95

Bon, après 10h00 d'impression, j'ai encore eu un arrêt brutal. J'ai pourtant remplacé les câbles par ceux que j'ai reçu.
J'ai donc 2 alimentations 3A, 2 câbles USB 2A (1 pour la raspberry, 1 pour l'écran tactile). Je vais testé avec une autre Raspberry PI3.

Repetier

Did you check afterwards if server is showing the power problems in bolt icon? Not to expect but better double check.

There is also an option to reset usb on timeout that helps with some printers in case it is the serial driver in linux that hangs due to some error.

docman95

Where is option for reset usb ?

undervoltage : never
cpu temperature 38°

Repetier

In printer configuration->General->Connection->USB Reconnect on Timeout. This is an automatic reconnect which causes the driver to restart.

docman95

je vais tester. Merci

docman95

Le paramètre a été modifié mais le test est un échec. A part réinstaller la version 0.86, je ne sais plus quoi faire. Merci de votre assistance. Il y a eu un plantage de repetier-server car la vidéo de la camera était figée aussi.

Repetier

Can you please start answering in english, so I can understand and follow the read. With languages I can not understand it is very hard to read the thread only seeing not understandable messages. And when I translate that part I forget what stands in some other messages if you understand.

What exactly happened? Did really the server restart? You need to check server.log and /var/log/syslog to see what is disturbing the prints. Always hard to say since so many things can cause print stops.

docman95

Hi,

Ok but a little English.

During work, printing stops suddenly for no reason. The nozzle remains stuck to the part. 
I modified the parameter as you requested, I replaced the usb cables and the power supplies but 
without solving the problem.

Logs
2021-03-15 18:16:11: Connection started: U20
2021-03-15 18:16:11: Reset printer U20
2021-03-15 18:16:21: No valid response seen within 10 seconds from printer, restarting connection
2021-03-15 18:16:21: Port closed for U20
2021-03-15 18:16:21: Connection closed: U20
2021-03-15 18:16:22: Connection started: U20
2021-03-15 18:16:22: Reset printer U20
2021-03-15 18:16:33: No valid response seen within 10 seconds from printer, restarting connection
2021-03-15 18:16:33: Port closed for U20
2021-03-15 18:16:33: Connection closed: U20
2021-03-15 18:16:34: Connection started: U20
2021-03-15 18:16:34: Reset printer U20
2021-03-15 18:16:44: No valid response seen within 10 seconds from printer, restarting connection
2021-03-15 18:16:44: Port closed for U20
2021-03-15 18:16:44: Connection closed: U20
2021-03-15 18:16:46: Connection started: U20
2021-03-15 18:16:46: Reset printer U20
2021-03-15 18:16:56: No valid response seen within 10 seconds from printer, restarting connection
2021-03-15 18:16:56: Port closed for U20
2021-03-15 18:16:56: Connection closed: U20
2021-03-15 18:16:58: Connection started: U20
2021-03-15 18:16:58: Reset printer U20

docman95

After start printer U20
2021-03-15 18:30:58: No valid response seen within 10 seconds from printer, restarting connection

2021-03-15 18:30:58: Port closed for U20

2021-03-15 18:30:58: Connection closed: U20

2021-03-15 18:31:00: Connection started: U20

2021-03-15 18:31:00: Reset printer U20

2021-03-15 18:31:19: MainRequestHandler::handleRequest:Assertion violation

2021-03-15 18:31:40: MainRequestHandler::handleRequest:Assertion violation

Repetier

Here you see attempts to connect so port is visible, but there is no response from the printer so server closes connection and opens again. Assuming it worked before you have baud rate and port set correctly. You should try if changing the end value of dtr and rts makes any difference. Also a test worth is deactivate printer in server and activate.
Last thing is unplug usb cable and reconnect. Would it then connect again?
The question here is mainly why do we get no more data from the printer. Depending on where the problem is different actions will lead to connecting again. It also might be that you need to reset printer to make it work again.

You can try to set in serial connection ping pong on. This reduces the risk of communication problems but also reduces maximum transfer data. But some firmwares get problems with high communication load. Others only communicate on special rts/dtr values which automatic reconnect may prevent from being set. Once we know what the problem is we can put in the correct fix.

docman95

The ping-pong mode is actived. i wil test tomorow

docman95

Hi,
For a 30 minute print, I have no problem. I will test a 1h00 print.

Repetier

1.0.4 is now released with some communication fixes that also might help.

docman95

the release is installed. i test for the firmware

docman95

Hi,
with the last version 1.0.4, the repeater-server shutdown was abrupt during work.

2021-03-21 15:08:15: Webdirectory: /usr/local/Repetier-Server/www/
2021-03-21 15:08:15: Storage directory: /var/lib/Repetier-Server/
2021-03-21 15:08:15: Configuration file: /usr/local/Repetier-Server/etc/RepetierServer.xml
2021-03-21 15:08:15: Directory for temporary files: /tmp/
2021-03-21 15:08:15: Reading firmware data ...
2021-03-21 15:08:15: Starting Network ...
2021-03-21 15:08:15: Active features:4095
2021-03-21 15:08:15: Reading printer configurations ...
2021-03-21 15:08:15: Reading printer config /var/lib/Repetier-Server/configs/U20.xml
2021-03-21 15:08:15: Starting printjob manager thread for U20
2021-03-21 15:08:15: Starting printer threads ...
2021-03-21 15:08:15: Starting printer thread for U20
2021-03-21 15:08:15: Starting work dispatcher subsystem ...
2021-03-21 15:08:15: Starting user database ...
2021-03-21 15:08:15: Importing projects ...
2021-03-21 15:08:15: Importing wifi connections from /var/lib/Repetier-Server/database/repetier-network.xml
2021-03-21 15:08:16: Importing wifi connections from /var/lib/Repetier-Server/database/repetier-network-stored.xml
2021-03-21 15:08:16: Initializing LUA ...
2021-03-21 15:08:16: Starting wifi watcher ...
2021-03-21 15:08:16: Register LUA cloud services
2021-03-21 15:08:16: add G-Code-Renderer
2021-03-21 15:08:16: LUA initalization finished.
2021-03-21 15:08:16: Internal work dispatcher thread started.
2021-03-21 15:08:16: Starting web server ... 
2021-03-21 15:08:16: Work dispatcher thread started.
2021-03-21 15:08:16: Webserver started.
2021-03-21 15:08:17: Connection started: U20
2021-03-21 15:08:17: Reset printer U20
2021-03-21 15:08:19: New SSID Docman
2021-03-21 15:08:27: No valid response seen within 10 seconds from printer, restarting connection
2021-03-21 15:08:27: Port closed for U20
2021-03-21 15:08:27: Connection closed: U20
2021-03-21 15:08:28: Connection started: U20
2021-03-21 15:08:28: Reset printer U20
2021-03-21 15:08:35: Websocket opened
2021-03-21 15:08:38: No valid response seen within 10 seconds from printer, restarting connection
2021-03-21 15:08:38: Port closed for U20
2021-03-21 15:08:38: Connection closed: U20
2021-03-21 15:08:39: Connection started: U20
2021-03-21 15:08:39: Reset printer U20
2021-03-21 15:08:49: No valid response seen within 10 seconds from printer, restarting connection
2021-03-21 15:08:49: Port closed for U20
2021-03-21 15:08:49: Connection closed: U20
2021-03-21 15:08:50: Connection started: U20
2021-03-21 15:08:50: Reset printer U20
2021-03-21 15:09:00: No valid response seen within 10 seconds from printer, restarting connection
2021-03-21 15:09:00: Port closed for U20
2021-03-21 15:09:00: Connection closed: U20
2021-03-21 15:09:02: Connection started: U20
2021-03-21 15:09:02: Reset printer U20
2021-03-21 15:09:12: No valid response seen within 10 seconds from printer, restarting connection
2021-03-21 15:09:12: Port closed for U20
2021-03-21 15:09:12: Connection closed: U20
2021-03-21 15:09:13: Connection started: U20
2021-03-21 15:09:13: Reset printer U20
2021-03-21 15:09:23: No valid response seen within 10 seconds from printer, restarting connection
2021-03-21 15:09:23: Port closed for U20
2021-03-21 15:09:23: Connection closed: U20
2021-03-21 15:09:25: Connection started: U20
2021-03-21 15:09:25: Reset printer U20
2021-03-21 15:09:35: No valid response seen within 10 seconds from printer, restarting connection
2021-03-21 15:09:35: Port closed for U20
2021-03-21 15:09:35: Connection closed: U20
2021-03-21 15:09:37: Connection started: U20
2021-03-21 15:09:37: Reset printer U20
2021-03-21 15:09:47: No valid response seen within 10 seconds from printer, restarting connection
2021-03-21 15:09:47: Port closed for U20
2021-03-21 15:09:47: Connection closed: U20
2021-03-21 15:09:49: Connection started: U20
2021-03-21 15:09:49: Reset printer U20
2021-03-21 15:09:59: No valid response seen within 10 seconds from printer, restarting connection
2021-03-21 15:09:59: Port closed for U20
2021-03-21 15:09:59: Connection closed: U20
2021-03-21 15:10:00: Connection started: U20
2021-03-21 15:10:00: Reset printer U20
2021-03-21 15:10:10: No valid response seen within 10 seconds from printer, restarting connection
2021-03-21 15:10:10: Port closed for U20
2021-03-21 15:10:10: Connection closed: U20
2021-03-21 15:10:12: Connection started: U20
2021-03-21 15:10:12: Reset printer U20
2021-03-21 15:10:23: No valid response seen within 10 seconds from printer, restarting connection
2021-03-21 15:10:23: Port closed for U20
2021-03-21 15:10:23: Connection closed: U20
2021-03-21 15:10:24: Connection started: U20
2021-03-21 15:10:24: Reset printer U20
2021-03-21 15:10:34: No valid response seen within 10 seconds from printer, restarting connection
2021-03-21 15:10:34: Port closed for U20
2021-03-21 15:10:34: Connection closed: U20
2021-03-21 15:10:35: Connection started: U20
2021-03-21 15:10:35: Reset printer U20
2021-03-21 15:10:45: No valid response seen within 10 seconds from printer, restarting connection
2021-03-21 15:10:45: Port closed for U20
2021-03-21 15:10:45: Connection closed: U20
2021-03-21 15:10:46: Connection started: U20
2021-03-21 15:10:46: Reset printer U20
2021-03-21 15:10:56: No valid response seen within 10 seconds from printer, restarting connection
2021-03-21 15:10:56: Port closed for U20
2021-03-21 15:10:56: Connection closed: U20
2021-03-21 15:10:57: Connection started: U20
2021-03-21 15:10:57: Reset printer U20
2021-03-21 15:11:07: No valid response seen within 10 seconds from printer, restarting connection
2021-03-21 15:11:07: Port closed for U20
2021-03-21 15:11:07: Connection closed: U20
2021-03-21 15:11:09: Connection started: U20
2021-03-21 15:11:09: Reset printer U20
2021-03-21 15:11:55: Websocket opened
2021-03-21 15:13:05: Job created: /var/lib/Repetier-Server/printer/U20/jobs/00000001_AU20_Cube20x20.u
2021-03-21 15:13:05: finish job creation /var/lib/Repetier-Server/printer/U20/jobs/00000001_AU20_Cube20x20.u
2021-03-21 15:13:05: start printjob AU20_Cube20x20 on printer U20
2021-03-21 15:16:06: killing printjob AU20_Cube20x20 on printer U20
2021-03-21 15:20:20: Websocket opened
2021-03-21 15:22:52: MainRequestHandler::handleRequest:Assertion violation