Hallo,
Ich habe seid neustem das Problem das regelmäßig die Verbindung zwischen Drucker und dem Host verloren geht.
Ich nutze Repetier Server Pro für Windows und hatte vorher nie solche Probleme, dass USB Kabeln habe ich überprüft und am GCode liegt es auch nicht jedoch hat sich auch nichts am Drucker verändert, weswegen ich mir nicht sicher bin, woran es liegen könnte. Habe mal den Inhalt der Konsole angehängt dort sind einige Fehlermeldungen jedoch kann ich diese nicht ganz deuten.
Weiß jemand was die Meldungen bedeuten könnten oder woran es liegen könnte?
Konsole;
10:46:32.324: DebugLevel:6
10:46:32.324: info:Continue from fatal state
10:46:32.324: RESCUE_STATE: OFF
10:46:32.417: SelectExtruder:0
10:52:17.365: buy:heating
10:56:37.368: X:295.00 Y:300.00 Z:0.000 E:0.0000
10:56:37.383: Jerk:20.00 ZJerk:0.30
10:56:41.505: Warning: Communication timeout - resetting communication buffer.
10:56:41.505: Connection status: Buffered:91, Manual Commands: 1, Job Commands: 5000
10:56:41.505: Buffer used:91 Enforced free byte:23 lines stored:5
10:56:45.514: Warning: Communication timeout - resetting communication buffer.
10:56:45.514: Connection status: Buffered:99, Manual Commands: 0, Job Commands: 5000
10:56:45.514: Buffer used:99 Enforced free byte:19 lines stored:5
10:56:51.379: Warning: Communication timeout - resetting communication buffer.
10:56:51.379: Connection status: Buffered:95, Manual Commands: 1, Job Commands: 5000
10:56:51.379: Buffer used:95 Enforced free byte:29 lines stored:5
10:56:59.927: Warning: Communication timeout - resetting communication buffer.
10:56:59.927: Connection status: Buffered:95, Manual Commands: 0, Job Commands: 5000
10:56:59.927: Buffer used:95 Enforced free byte:19 lines stored:5
10:57:03.942: Warning: Communication timeout - resetting communication buffer.
10:57:03.942: Connection status: Buffered:95, Manual Commands: 1, Job Commands: 5000
10:57:03.942: Buffer used:95 Enforced free byte:23 lines stored:5
10:57:07.926: Error:Wrong checksum (5)
10:57:07.926: Resend:96
10:57:07.942: Error:Wrong checksum (4)
10:57:48.943: start
10:57:48.943: Info:PowerUp
10:57:48.943: Detected EEPROM version:20
10:57:48.965: Transformation matrix: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000
10:57:48.965: Free RAM:76180
10:57:48.965: SelectExtruder:0
10:57:48.969: DebugLevel:6
10:57:48.973: info:Continue from fatal state
10:57:48.993: FIRMWARE_NAME:Repetier_1.0.4 COMPILED:Jun 12 2020 FIRMWARE_URL:https://github.com/repetier/Repetier-Firmware/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Core_XY EXTRUDER_COUNT:2 REPETIER_PROTOCOL:3
10:57:48.997: Cap:PROGRESS:0
10:57:48.998: Cap:AUTOREPORT_TEMP:1
10:57:49.002: Cap:HOST_RESCUE:1
10:57:49.002: Cap:EEPROM:1
10:57:49.002: Cap:AUTOLEVEL:1
10:57:49.005: Cap:Z_PROBE:1
10:57:49.005: Cap:SOFTWARE_POWER:0
10:57:49.005: Cap:TOGGLE_LIGHTS:0
10:57:49.005: Cap:PAUSESTOP:1
10:57:49.005: Cap:PREHEAT:1
10:57:49.005: Cap:EMERGENCY_PARSER:1
10:57:49.005: Printed filament:1360.16m Printing time:23 days 10 hours 31 min
10:57:49.005: PrinterMode:FFF
10:57:49.021: Info:No case lights
10:57:49.021: X:0.00 Y:0.00 Z:0.000 E:0.0000
10:57:49.021: DebugLevel:6
10:57:49.021: Config:Baudrate:115200
10:57:49.037: Config:InputBuffer:127
10:57:49.037: Config:NumExtruder:2
10:57:49.037: Config:MixingExtruder:0
10:57:49.037: Config:HeatedBed:1
10:57:49.037: Config:SDCard:1
10:57:49.037: Config:Fan:1
10:57:49.037: Config:Fan2:0
10:57:49.037: Config:LCD:0
10:57:49.037: Config:SoftwarePowerSwitch:0
10:57:49.052: Config:XHomeDir:1
10:57:49.052: Config:YHomeDir:1
10:57:49.052: Config:ZHomeDir:-1
10:57:49.052: Config:XHomePos:295.00
10:57:49.052: Config:YHomePos:300.00
10:57:49.052: Config:ZHomePos:0.000
10:57:49.052: Config:SupportG10G11:1
10:57:49.068: Config:SupportLocalFilamentchange:1
10:57:49.068: Config:CaseLights:0
10:57:49.068: Config:ZProbe:1
10:57:49.068: Config:Autolevel:1
10:57:49.068: Config:EEPROM:1
10:57:49.068: Config:PrintlineCache:64
10:57:49.068: Config:JerkXY:20.00
10:57:49.068: Config:KeepAliveInterval:2000
10:57:49.083: Config:JerkZ:0.30
10:57:49.083: Config:RetractionLength:3.00
10:57:49.083: Config:RetractionLongLength:13.00
10:57:49.083: Config:RetractionSpeed:40.00
10:57:49.083: Config:RetractionZLift:0.00
10:57:49.083: Config:RetractionUndoExtraLength:0.00
10:57:49.099: Config:RetractionUndoExtraLongLength:0.00
10:57:49.099: Config:RetractionUndoSpeed:20.00
10:57:49.099: Config:XMin:0.00
10:57:49.099: Config:YMin:0.00
10:57:49.099: Config:ZMin:0.00
10:57:49.099: Config:XMax:295.00
10:57:49.099: Config:YMax:300.00
10:57:49.099: Config:ZMax:280.00
10:57:49.115: Config:XSize:295.00
10:57:49.115: Config:YSize:300.00
10:57:49.115: Config:ZSize:280.00
10:57:49.115: Config:XPrintAccel:1000.00
10:57:49.115: Config:YPrintAccel:1000.00
10:57:49.115: Config:ZPrintAccel:100.00
10:57:49.115: Config:XTravelAccel:1000.00
10:57:49.115: Config:YTravelAccel:1000.00
10:57:49.130: Config:ZTravelAccel:100.00
10:57:49.130: Config:PrinterType:Cartesian
10:57:49.130: Config:MaxBedTemp:130
10:57:49.130: Config:Extr.1:Jerk:20.00
10:57:49.130: Config:Extr.1:MaxSpeed:50.00
10:57:49.130: Config:Extr.1:Acceleration:5000.00
10:57:49.149: Config:Extr.1:Diameter:0.00
10:57:49.149: Config:Extr.1:MaxTemp:290
10:57:49.153: Config:Extr.2:Jerk:20.00
10:57:49.153: Config:Extr.2:MaxSpeed:50.00
10:57:49.157: Config:Extr.2:Acceleration:5000.00
10:57:49.161: Config:Extr.2:Diameter:0.00
10:57:49.161: Config:Extr.2:MaxTemp:290
10:57:49.166: RESCUE_STATE: OFF
10:58:23.242: DebugLevel:6
10:58:23.245: info:Continue from fatal state
10:58:23.246: RESCUE_STATE: OFF
10:58:23.319: SelectExtruder:0
10:59:14.065: X:295.00 Y:300.00 Z:0.000 E:0.0000
10:59:14.080: Jerk:20.00 ZJerk:0.30
10:59:18.174: Warning: Communication timeout - resetting communication buffer.
10:59:18.174: Connection status: Buffered:91, Manual Commands: 0, Job Commands: 5000
10:59:18.174: Buffer used:91 Enforced free byte:19 lines stored:5
10:59:22.186: Warning: Communication timeout - resetting communication buffer.
10:59:22.186: Connection status: Buffered:95, Manual Commands: 1, Job Commands: 5000
10:59:22.186: Buffer used:95 Enforced free byte:23 lines stored:5
10:59:28.080: Warning: Communication timeout - resetting communication buffer.
10:59:28.080: Connection status: Buffered:95, Manual Commands: 0, Job Commands: 5000
10:59:28.080: Buffer used:95 Enforced free byte:19 lines stored:5
10:59:36.658: Warning: Communication timeout - resetting communication buffer.
10:59:36.658: Connection status: Buffered:99, Manual Commands: 0, Job Commands: 5000
10:59:36.658: Buffer used:99 Enforced free byte:19 lines stored:5
10:59:40.682: Warning: Communication timeout - resetting communication buffer.
10:59:40.682: Connection status: Buffered:95, Manual Commands: 0, Job Commands: 5000
10:59:40.682: Buffer used:95 Enforced free byte:19 lines stored:5
10:59:44.620: Error:Wrong checksum (4)
10:59:44.635: Resend:95
10:59:44.651: Error:Wrong checksum (4)
11:07:58.151: Jerk:15.00 ZJerk:0.30
11:07:58.479: Jerk:20.00 ZJerk:0.30
11:07:58.479-11:29:05.449 // nur ZJerk
11:29:05.449: Jerk:10.00 ZJerk:0.30
11:29:18.066: Jerk:20.00 ZJerk:0.30
11:31:11.821: Warning: Communication timeout - resetting communication buffer.
11:31:11.821: Connection status: Buffered:95, Manual Commands: 0, Job Commands: 5000
11:31:11.821: Buffer used:95 Enforced free byte:19 lines stored:5
11:31:59.279: start
11:31:59.279: Info:PowerUp
11:31:59.279: Detected EEPROM version:20
11:31:59.294: Transformation matrix: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000
11:31:59.294: Free RAM:76180
11:31:59.294: SelectExtruder:0
11:31:59.425: RESCUE_STATE: LX:134.60 LY:129.83 LZ:1.60 LE:2101.29 LT:0 X:300.00 Y:300.00 Z:1.60 E:2101.29
11:32:11.100: Warning: Seems like we missed a ok - continue sending. (3)
