Zogar Could you put the option to make permanent the variation of the flow and speed the same as it is in the layer fan?
Repetier Why? Slicers do not change it during print. Only bad thing I saw so far is that Prusa started setting flow to 95% on some layer heights. But that is in the start script so could easily be changed.
Zogar Repetier wroteWhy? Slicers do not change it during print. Only bad thing I saw so far is that Prusa started setting flow to 95% on some layer heights. But that is in the start script so could easily be changed. I print the same Gcode in multiple printers. Different models and manufacturers. Repetier Flow should be the same for all printers or some are not correctly calibrated. Anyway making server ignore M220/M221 does not set the value you want. It still gets lost on every connect where we init it with 100% anyway. So I see no gain in this change.
Repetier Flow should be the same for all printers or some are not correctly calibrated. Anyway making server ignore M220/M221 does not set the value you want. It still gets lost on every connect where we init it with 100% anyway. So I see no gain in this change.
