Anisachse2 Hello, it would be great when the Touch Screen Interface have two separate Buttons for Homing X/Y and Z in Movement. When i cancel a Job e.g. a Temp Tower and want to move the Hotend away, it don`t want to home Z. Greetings
Repetier You can add additional commands in printer settings->gcodes which appear in printer commands.You can also addG28 X0 Y0in the gcode stop event so it gets executed automatically every time you stop.
Anisachse2 After using this Methode a while, splitting home all to XY and z makes in my oppinion more sense. Using home all makes absolutely no sense, except when trying if the printer homes correctly.
Repetier Homing makes only really sense when you enabled the printer and position is unknown. Maybe xy when you changed filament and there is a chance you moved position. In all other cases a move to the correct position is faster. Especially for stop/end of print I always add a G1 move to the paring position so I can remove object best.
Anisachse2 But Klipper forgets the position every time the motor are disabled. And this happens really quickly. So homing is a task that i use really often.
Repetier Not a klipper user so never have that problem. You could try increasing the timeout for motors. But I see your point. Will see if I see a solution, but touchscreen must also work on small screens so space is a rare thing.
