FSR_Endstop

boubouexpress

hello

I use

https://github.com/JohnSL/FSR_Endstop </div><div>with a radds connected to the Z-pin mini

but it does not work,Here mom config file

sorry for french translation

I start with firmware repetier

if I can run my delta, I like to donate http://88.120.215.140:85/share/CKMsYJxarjfzgniX/Configuration.h</div><div> </div><div> </div><div> </div>

boubouexpress

Repetier

Upgrade to latest 0.92.3 and then use M119 to check if it switches. Should show L and when triggered H. If not the pin number or voltage signal do not match. Don't know these FSR switches so maybe they do not work with 3,3v?

boubouexpress

13:19:55.504 : N52 M119 *61

13:19:55.504 : endstops hit: x_max:H y_max:H z_max:H Z-probe state:H

13:19:55.504 : Echo:N52 M119

13:19:58.035 : N53 M105 *49

13:19:58.035 : Echo:N53 M105

13:20:01.096 : N54 M105 *54

13:20:01.096 : Echo:N54 M105

13:20:04.157 : N55 M105 *55

13:20:04.157 : Echo:N55 M105

13:20:05.457 : N56 M119 *57

13:20:05.457 : endstops hit: x_max:H y_max:H z_max:H Z-probe state:L

13:20:05.457 : Echo:N56 M119

boubouexpress

Résultat de commande G32

113:10:15.084 : N105 G32 *60

13:10:15.084 : ok 105

13:10:16.634 : N106 M105 *0

13:10:19.705 : N107 M105 *1

13:10:22.765 : N108 M105 *14

13:10:25.816 : N109 M105 *15

13:10:28.882 : N110 M105 *7

13:10:31.933 : N111 M105 *6

13:10:32.003 : FlowMultiply:100

13:10:32.003 : X:0.00 Y:0.00 Z:570.200 E:0.0000

13:10:34.994 : N112 M105 *5

13:10:38.049 : N113 M105 *4

13:10:46.251 : Z-probe:0.01 X:20.00 Y:20.00

13:10:46.251 : Error:A hit floor

13:10:46.261 : Warning:Invalid delta coordinate - move ignored x:16355 y:3200 z:1600

13:10:46.261 : Warning:in queueDeltaMove to calculateDeltaSubSegments returns error.

13:10:46.261 : Warning:moveTo / queueDeltaMove returns error

13:10:46.611 : Z-probe:12.31 X:66.66 Y:20.00

13:10:52.782 : Error:A hit floor

13:10:52.792 : Warning:Invalid delta coordinate - move ignored x:12363 y:10327 z:1600

13:10:52.792 : Warning:in queueDeltaMove to calculateDeltaSubSegments returns error.

13:10:52.792 : Warning:moveTo / queueDeltaMove returns error

13:10:52.802 : Z-probe:-22.62 X:66.66 Y:20.00

13:11:04.112 : Echo:N105 G32

Repetier

Please check your eeprom values. Ther emust be an error in some values as the coordinates are so far off the sensible values and this normally happens if eeprom values are wrong.

boubouexpress

Hello

Coordinate Problem solved. the new problem he performs the test on the 3 coordinates email it does not touch the bed.

M119 to see if it passes. L and should show when triggered H. "Inverted for me"

boubouexpress

hello

my Z probe walk

thank you

just change

"#define Z_PROBE_ON_HIGH 0"

Here the configuration

// #################### Z-Probing #####################

#define FEATURE_Z_PROBE 1

#define Z_PROBE_BED_DISTANCE 5

#define Z_PROBE_PIN ORIG_Z_MIN_PIN

#define Z_PROBE_PULLUP 1

#define Z_PROBE_ON_HIGH 0

#define Z_PROBE_X_OFFSET 0

#define Z_PROBE_Y_OFFSET 0

#define Z_PROBE_WAIT_BEFORE_TEST 0

#define Z_PROBE_SPEED 5

#define Z_PROBE_XY_SPEED 150

#define Z_PROBE_SWITCHING_DISTANCE 0

#define Z_PROBE_REPETITIONS 1

#define Z_PROBE_HEIGHT 0

#define Z_PROBE_START_SCRIPT ""

#define Z_PROBE_FINISHED_SCRIPT ""

#define FEATURE_AUTOLEVEL 1

#define Z_PROBE_X1 -65

#define Z_PROBE_Y1 -59

#define Z_PROBE_X2 68

#define Z_PROBE_Y2 -53

#define Z_PROBE_X3 7

#define Z_PROBE_Y3 87

#define FEATURE_AXISCOMP 1

#define AXISCOMP_TANXY 0

#define AXISCOMP_TANYZ 0

#define AXISCOMP_TANXZ 0