hello everyone I m pier luigi, for some time I have had an anycubic i3 mega, when I print materials
other than the pla it gives me the error T0 Abnormal Sensor and crashes.
I made a PID with repetier host and this error comes out.
what can it be ?
thanks in advance
<div><div><div>
12:48:46.691: PID Autotune start</div><div>12:52:40.091: bias: 89 d: 89 min: 235.94 max: 245.00 Ku: 25.01 Tu: 34.80</div><div>12:52:40.091: Classic PID </div><div>12:53:16.836: bias: 88 d: 88 min: 235.00 max: 245.21 Ku: 21.95 Tu: 36.57</div><div>12:53:16.836: Classic PID </div><div>12:53:52.791: bias: 88 d: 88 min: 235.00 max: 245.00 Ku: 22.41 Tu: 35.78</div><div>12:53:52.791: Classic PID </div><div>12:54:27.165: bias: 88 d: 88 min: 235.39 max: 245.00 Ku: 23.32 Tu: 34.21</div><div>12:54:27.165: Classic PID </div><div>12:55:00.154: bias: 87 d: 87 min: 236.25 max: 245.00 Ku: 25.32 Tu: 32.83</div><div>12:55:00.154: Classic PID </div><div>12:55:34.728: bias: 87 d: 87 min: 235.39 max: 245.00 Ku: 23.05 Tu: 34.41</div><div>12:55:34.728: Classic PID </div><div>12:55:34.735: PID Autotune finished! Put the last Kp, Ki and Kd constants from below into Configuration.h</div><div>12:55:34.735: #define DEFAULT_Kp 13.83</div><div>12:55:34.735: #define DEFAULT_Ki 0.80</div><div>12:55:34.735: #define DEFAULT_Kd 59.49</div><div>12:55:34.752: Error:checksum mismatch, Last Line: 200</div><div>12:55:34.752: Resend: 201</div></div> </div> <div> </div>
