user Afeter 30 mins printing temp of bed set to 0. In gcode i has no see it.The gcode:http://www.filedropper.com/cfffplenin<br/></div><br/>
Repetier So it is not in gcode we send. Might be that it comes from some protection tests in firmware. If it happens frequently keep logging enabled so you can check the logs afterwards and see if there are any messages from firmware.
user Hi! Now i has log for the problem! The T extruder set to 0 after first layer. gcode is ok:https://dropmefiles.com/iMkmV</div><br/>
Repetier Line 6880M104 S24ok it's 24°C but that is nearly off as it is room temperature. If it is exactly after first level you only have set first level temperature for filament but not regular temperature or regular temp is 24°C.
