SDCard not working on DUE+RuRamps

Braccoz

hi, so i've been using repetier-fw v1 dev (just updated to latest) on this setup (ruramps 1.3 + due) for a long time and everything was good.

for the first time tho, today i tried to use the SD Card through a common reprapdiscount smart controller. it does not work.
but it works in Marlin 2.0 bugfix so it's not a hardware problem either.

pin assignment appears correct and identical between marlin and repetier. i get no error messages in the log, just

17:55:05.869 : Begin file list

17:55:05.869 : End file list

any clues on what could be wrong? SDSUPPORT is obviously enabled in configuration.h, along with the SDCARDDETECT pin

Braccoz

ok so adding

#define SDSUPPORT 1

#define SDCARDDETECT 51

to displaylist.h in the proper section makes it work. so there must be something somewhere that undefines the values from both configuration.h and pins.h. clues?

Braccoz

nevermind all this, found the culprit in ui.h. will make fix and PR

Repetier

dev version now contains the fix. Thanks for the fix.