Hello,
First, nice to have such a reliable 3D Printing Software.
Most Things turn out as you need it, and you can set all things very userfriendly.
My Problem is with the Measurements. I got often models, what have to fit at 1mm or better.
But the Software add the Settings from Shell-Top thickness additional to the total Measurements.
IE. when i have 0.6mm Wall and Top thickness ie at circles or tubes with 20mm, it adds it to the total measures,
sometimes on the inner Side, sometimes at the outer measurements, that it is a total of 20,6 mm sometimes 21,2.
And that can be very disturbing at ie connectors or holder for ie bearings.
You also can not set the thickness to zero, or the field complains to turn it off.
The structure is most time solid enough, that i dont want use additional walls.
Could it maybe made, that you make a button, "add to outer side" or "inner".
Or change it complete, that the wall will be allways adds to to inner side, at the cost from the inner structures from the volume.
And well, my printer is pretty well adjusted, and no matter what model i print,
it are allways the same values, what make the model oversized.
Regards
