Hello
I use a 1.0.0v of repetier firmware
I use it on Delta
I have succefull calibrate the printer but I have a probleme with G33
23:02:37.084 : Z correction disabled
23:02:37.084 : Reference Z for measurement:4.200
23:02:37.084 : Info:Autoleveling disabled
23:02:40.140 : N324 M10534
23:02:43.194 : N325 M105*35
23:02:46.236 : SelectExtruder:0
23:02:46.236 : X:0.00 Y:0.00 Z:184.488 E:0.0000
23:02:46.236 : Info:Autoleveling enabled
23:02:46.251 : N326 M10532
23:02:49.313 : N327 M105*33
23:02:52.369 : N328 M10546
23:02:55.425 : N329 M105*47
23:02:56.241 : Z-probe:4.662 X:-40.00 Y:60.00
23:02:58.485 : N330 M10539
23:02:59.118 : Z-probe:4.550 X:-20.00 Y:60.00
23:03:01.542 : N331 M105*38
23:03:01.978 : Z-probe:4.456 X:-0.00 Y:60.00
23:03:04.600 : N332 M10537
23:03:04.887 : Z-probe:4.631 X:20.00 Y:60.00
23:03:07.655 : N333 M105*36
23:03:07.829 : Z-probe:4.737 X:40.00 Y:60.00
23:03:10.718 : N334 M10535
23:03:13.071 : Z-probe:4.869 X:-60.00 Y:40.00
23:03:13.773 : N335 M105*34
23:03:15.963 : Z-probe:4.594 X:-40.00 Y:40.00
23:03:16.828 : N336 M10533
23:03:18.824 : Z-probe:4.481 X:-20.00 Y:40.00
23:03:19.891 : N337 M105*32
23:03:21.701 : Z-probe:4.475 X:-0.00 Y:40.00
23:03:22.946 : N338 M10547
23:03:24.594 : Z-probe:4.600 X:20.00 Y:40.00
23:03:26.003 : N339 M105*46
23:03:27.567 : Z-probe:4.881 X:40.00 Y:40.00
23:03:29.065 : N340 M105*32
23:03:30.652 : Z-probe:5.362 X:60.00 Y:40.00
23:03:36.357 : Z-probe:4.700 X:-60.00 Y:19.99
23:03:39.234 : Z-probe:4.500 X:-40.00 Y:19.99
23:03:42.080 : Z-probe:4.387 X:-20.00 Y:19.99
23:03:44.909 : Z-probe:4.350 X:-0.00 Y:19.99
23:03:47.769 : Z-probe:4.431 X:20.00 Y:19.99
23:03:50.710 : Z-probe:4.781 X:40.00 Y:19.99
23:03:53.746 : Z-probe:5.175 X:60.00 Y:19.99
23:03:59.421 : Z-probe:4.619 X:-60.00 Y:-0.01
23:04:02.281 : Z-probe:4.425 X:-40.00 Y:-0.01
23:04:05.094 : Z-probe:4.281 X:-20.00 Y:-0.01
23:04:07.906 : Z-probe:4.237 X:-0.00 Y:-0.01
23:04:10.733 : Z-probe:4.306 X:20.00 Y:-0.01
23:04:13.625 : Z-probe:4.612 X:40.00 Y:-0.01
23:04:16.629 : Z-probe:5.031 X:60.00 Y:-0.01
23:04:22.301 : Z-probe:4.581 X:-60.00 Y:-19.99
23:04:25.129 : Z-probe:4.337 X:-40.00 Y:-19.99
23:04:27.925 : Z-probe:4.181 X:-20.00 Y:-19.99
23:04:30.689 : Z-probe:4.069 X:-0.00 Y:-19.99
23:04:33.486 : Z-probe:4.206 X:20.00 Y:-19.99
23:04:36.362 : Z-probe:4.469 X:40.00 Y:-19.99
23:04:39.318 : Z-probe:4.837 X:60.00 Y:-19.99
23:04:45.005 : Z-probe:4.631 X:-60.00 Y:-39.99
23:04:47.849 : Z-probe:4.381 X:-40.00 Y:-39.99
23:04:50.629 : Z-probe:4.125 X:-20.00 Y:-39.99
23:04:53.393 : Z-probe:4.069 X:-0.00 Y:-39.99
23:04:56.189 : Z-probe:4.169 X:20.00 Y:-39.99
23:04:59.001 : Z-probe:4.306 X:40.00 Y:-39.99
23:05:01.924 : Z-probe:4.650 X:60.00 Y:-39.99
23:05:07.069 : Z-probe:4.500 X:-40.00 Y:-60.00
23:05:09.882 : Z-probe:4.244 X:-20.00 Y:-60.00
23:05:12.661 : Z-probe:4.131 X:-0.00 Y:-60.00
23:05:15.441 : Z-probe:4.144 X:20.00 Y:-60.00
23:05:18.285 : Z-probe:4.387 X:40.00 Y:-60.00
23:05:18.492 : Info:Distortion correction matrix:
23:05:18.492 : -1, -1, -1, -1, -1, -1, -1
23:05:18.492 : -1, -1, -1, -1, -1, -1, -1
23:05:18.492 : -1, -1, -1, -1, -1, -1, -1
23:05:18.492 : -1, -1, -1, -1, -1, -1, -1
23:05:18.492 : -1, -1, -1, -1, -1, -1, -1
23:05:18.492 : -1, -1, -1, -1, -1, -1, -1
23:05:18.492 : -1, -1, -1, -1, -1, -1, -1
23:05:18.492 : G33 X-60.00 Y-60.00 Z-0.012
23:05:18.492 : G33 X-60.00 Y-40.00 Z-0.012
23:05:18.492 : G33 X-60.00 Y-20.00 Z-0.012
23:05:18.492 : G33 X-60.00 Y0.00 Z-0.012
23:05:18.492 : G33 X-60.00 Y20.00 Z-0.012
23:05:18.492 : G33 X-60.00 Y40.00 Z-0.012
23:05:18.492 : G33 X-60.00 Y60.00 Z-0.012
23:05:18.492 : G33 X-40.00 Y-60.00 Z-0.012
23:05:18.492 : G33 X-40.00 Y-40.00 Z-0.012
23:05:18.492 : G33 X-40.00 Y-20.00 Z-0.012
23:05:18.492 : G33 X-40.00 Y0.00 Z-0.012
23:05:18.493 : G33 X-40.00 Y20.00 Z-0.012
23:05:18.493 : G33 X-40.00 Y40.00 Z-0.012
23:05:18.493 : G33 X-40.00 Y60.00 Z-0.012
23:05:18.493 : G33 X-20.00 Y-60.00 Z-0.012
23:05:18.493 : G33 X-20.00 Y-40.00 Z-0.012
23:05:18.493 : G33 X-20.00 Y-20.00 Z-0.012
23:05:18.493 : G33 X-20.00 Y0.00 Z-0.012
23:05:18.493 : G33 X-20.00 Y20.00 Z-0.012
23:05:18.493 : G33 X-20.00 Y40.00 Z-0.012
23:05:18.493 : G33 X-20.00 Y60.00 Z-0.012
23:05:18.493 : G33 X0.00 Y-60.00 Z-0.012
23:05:18.493 : G33 X0.00 Y-40.00 Z-0.012
23:05:18.493 : G33 X0.00 Y-20.00 Z-0.012
23:05:18.493 : G33 X0.00 Y0.00 Z-0.012
23:05:18.493 : G33 X0.00 Y20.00 Z-0.012
23:05:18.493 : G33 X0.00 Y40.00 Z-0.012
23:05:18.493 : G33 X0.00 Y60.00 Z-0.012
23:05:18.493 : G33 X20.00 Y-60.00 Z-0.012
23:05:18.494 : G33 X20.00 Y-40.00 Z-0.012
23:05:18.494 : G33 X20.00 Y-20.00 Z-0.012
23:05:18.494 : G33 X20.00 Y0.00 Z-0.012
23:05:18.494 : G33 X20.00 Y20.00 Z-0.012
23:05:18.494 : G33 X20.00 Y40.00 Z-0.012
23:05:18.494 : G33 X20.00 Y60.00 Z-0.012
23:05:18.494 : G33 X40.00 Y-60.00 Z-0.012
23:05:18.494 : G33 X40.00 Y-40.00 Z-0.012
23:05:18.494 : G33 X40.00 Y-20.00 Z-0.012
23:05:18.494 : G33 X40.00 Y0.00 Z-0.012
23:05:18.494 : G33 X40.00 Y20.00 Z-0.012
23:05:18.494 : G33 X40.00 Y40.00 Z-0.012
23:05:18.494 : G33 X40.00 Y60.00 Z-0.012
23:05:18.494 : G33 X60.00 Y-60.00 Z-0.012
23:05:18.494 : G33 X60.00 Y-40.00 Z-0.012
23:05:18.494 : G33 X60.00 Y-20.00 Z-0.012
23:05:18.494 : G33 X60.00 Y0.00 Z-0.012
23:05:18.494 : G33 X60.00 Y20.00 Z-0.012
23:05:18.494 : G33 X60.00 Y40.00 Z-0.012
23:05:18.494 : G33 X60.00 Y60.00 Z-0.012
23:05:18.494 : Z correction enabled
How you can see my bed it s not flat, but the Info:Distortion correction matrix all it s -1
I have miss somethings?
thank you for your help and sorry for my bad english
