Repetier Host 2.0.5 - Slicer 1.36.2

nkPrt

Not sure if I do something wrong but I found the following not working as expected:

1. Whenever I override the Slic3r settings, cooling is always enabled and always M106 commands are added to G-code even when I completely disable cooling feature from Slic3r.

2. After homing Z, nozzle is raised 10mm from the bed but Repetier Host sees it at 0mm as a result any firt-move that affects Z axis does not reflect on the current coordinates.

Thanks,
Nick

nkPrt

Edit: A Small correction. In the case of the 1st issue it seems the slic3r itself adds cooling command even if cooling as a feature is disabled.

Repetier

You are right, slicer is ignoring the cooling even if disabled in filament. What worked is setting min and max fan speed to 0.

2. You need to tell host z homing position. For z min 0 is normal, but nowadays you can configure firmware to go up after homing. In Printer Settings->Printer Shape you can set z home position to 10 and then it shows the 10 after homing.

nkPrt

That's brilliant. Thank you for answering both answers.

Just a small note of appreciation, Your have done a really great work and Repetier host is one of my go-go application for my everyday needs and most importantly without a price tag. I gladly donated for a second time and I sincerely thank you for your hard work!