Repetier Host 2.0.1 - CuraEngine seems to ignore 'Start' and 'End' gcode settings

jmcmullan

In RepetierHost 1.6, I had my CuraEngine slicer settings set to add custom start and end gcode (to do a hotend purge, set up for volumetric extrusion, etc).

Now, with RepetierHost 2.0, it seems to ignore these settings, and the sliced file always starts with:

;Generated with Cura_SteamEngine 14.09

M109 S210 ;Heatup to 210C

G21 ;metric values

G90 ;absolute positioning

G28 ;Home

G1 Z15.0 F300 ;move the platform down 15mm

G92 E0 ;zero the extruded length

G1 F200 E5 ;extrude 5mm of feed stock

G92 E0 ;zero the extruded length again

.. instead of my custom GCode.

Any ideas? Known issue?

jmcmullan

To reproduce:

From the ReptierHost log:
07:33:16.097 : CuraEngine command:/home/jmcmullan/Desktop/3DP/RepetierHost-2.0.1/plugins/CuraEngine/CuraEngine -p -v -c "/home/jmcmullan/.local/share/RepetierHost/cura.ini" -s posx=0 -s posy=0 -o "/home/jmcmullan/.local/share/RepetierHost/composition.gcode" "/home/jmcmullan/.local/share/RepetierHost/composition0.stl" "-"

/home/jmcmullan/.local/share/RepetierHost/cura.ini:

layerThickness = 275

initialLayerThickness = 150

filamentDiameter = 1128

filamentFlow = 100

extrusionWidth = 800

layer0extrusionWidth = 800

insetCount = 1

infillOverlap = 15

initialSpeedupLayers = 4

initialLayerSpeed = 26

printSpeed = 40

infillSpeed = 26

skinSpeed = 40

inset0Speed = 26

insetXSpeed = 40

moveSpeed = 536

fanSpeedMin = 100

fanSpeedMax = 100

supportAngle = -1

supportEverywhere = 0

supportLineDistance = 2000

supportXYDistance = 800

supportZDistance = 400

supportExtruder = -1

retractionAmount = 7000

retractionSpeed = 40

retractionMinimalDistance = 0

retractionAmountExtruderSwitch = 0

retractionZHop = 75

minimalExtrusionBeforeRetraction = 0

enableCombing = 1

multiVolumeOverlap = 0

objectSink = 0

minimalLayerTime = 5

minimalFeedrate = 10

coolHeadLift = 0

perimeterBeforeInfill = 0

extruderOffset[0].X = 0

extruderOffset[0].Y = 0

extruderOffset[1].X = 0

extruderOffset[1].Y = 0

fixHorrible = 1

fanFullOnLayerNr = 2

supportType = 0

infillPattern = 0

sparseInfillLineDistance = 3809

downSkinCount = 4

upSkinCount = 4

skirtDistance = 0

skirtLineCount = 5

gcodeFlavor = 5

spiralizeMode = 0

enableOozeShield = 1

autoCenter = 0

startCode = """

; Default start code

G28 ; Home extruder

G1 Z15 X-1 Y-85 F4800

M107 ; Turn off fan

G90 ; Absolute positioning

M82 ; Extruder in absolute mode

; Volumetric extrusion:1

M200 T0 D1.75

; Bring bed up to temp

M190 S65

; Activate all used extruder

M104 T0 S230

G92 E0 ; Reset extruder position

; Wait for all used extruders to reach temperature

M109 T0 S230

; Wipe the nozzle on bed

G1 Z0.1

G2 X0 Y-85 I1 J85 E30 F4800

G92 E0 ; Reset extruder

"""

endCode = """

; Default end code

;G1 X0 Y0 Z180; Get extruder out of way. Uncomment to use!

M107 ; Turn off fan

; Disable all extruder

G91 ; Relative positioning

G1 E-1 ; Reduce filament pressure

M104 T0 S0

M104 T1 S0

G90 ; Absolute positioning

G92 E0 ; Reset extruder position

M140 S0 ; Disable heated bed

M84 ; Turn steppers off

; Volumetric extrusion:0

M200 T0 D0

G28

"""

preSwitchExtruderCode = """

"""

postSwitchExtruderCode = """

"""

Repetier

Have tested it with latest version and it inserted the start code I tested. Then used exactly your start code and it still worked. Removing the start code gives no start code and not 210 as in your case. So I wonder if it saw your cura.ini at all or if it was just using some defaults for everything. Any error messages in log? No read permissions on cura.ini?

jmcmullan

20:22:14.767 : <CuraEngine> Config(/home/jmcmullan/.local/share/RepetierHost/cura.ini):L13: Failed to set 'skinSpeed' to '40'

20:22:14.767 : <CuraEngine> Failed to read config '/home/jmcmullan/.local/share/RepetierHost/cura.ini'

md5sum of the CuraEngine plugins:

$ md5sum plugins/CuraEngine/CuraEngine64

7e3b8c5b44690ee2dd007fd7132b1762 plugins/CuraEngine/CuraEngine64

md5sum plugins/CuraEngine/CuraEngine

19126e7a8f8ee48eb4f5b2405212e1e8 plugins/CuraEngine/CuraEngine

$ ls -l plugins/CuraEngine/

total 7080

-rwxr-xr-x 1 jmcmullan jmcmullan 2531049 Jul 4 2015 CuraEngine

-rwxr-xr-x 1 jmcmullan jmcmullan 1965872 Jul 2 2015 CuraEngine32

-rwxr-xr-x 1 jmcmullan jmcmullan 2535136 Jul 4 2015 CuraEngine64

-rw-r--r-- 1 jmcmullan jmcmullan 214528 May 8 13:15 CuraEngine.dll

Removing 'CuraEngine' 19126e... and making it a symlink to CuraEngine64:

$ ln -sf CuraEngine64 plugins/CuraEngine/CuraEngine

solved my issues! I can now print with my custom G code.

Thanks for have me check my logs - I wouldn't have guessed this.

Looks like an old version of CuraEngine was in my plugins directory.

Repetier

Sounds then like 32 bit version for linux is buggy.

orobardet

Hi,

I got the same issue with Host version 2.0.1 on linux and with curaengine: not only start and end gcode where ignore, but all settings (printer settings and dimension, nozzle size, filament temp, ...).

In my plugins/CuraEngine directory, the 3 executable (CuraEngine, CuraEngine32 and CuraEngine64) all have different checksum. I can't tell to which one "CuraEngine" correspond...

Like jmcmullan, I moved away "CuraEngine" and create a new on as a symlink against "CuraEngine64".
I confirmed it solves the problem.

But it's strange, and I had no issues with 2.0.0.

Repetier

Very strange. I tested just myself and reported cura version is 15.05 and both 32 and 64 bit work. One of them gets copied from configuration script. So unless you do not run the script there should be no reason that it does not copy 32 or 64 to CuraEngine.

So did you run configureFirst.sh after unpacking?